Benefitting from the combined properties of intrinsic ceramic materials and advanced porous
configuration, lightweight porous ceramics with porosity ranging from 2.3 to 99% and pore …

Open-porous silicon nitride ceramics have been fabricated via low-temperature processing
at 1200° C using phosphoric acid as an inorganic binder and pore-forming agent. A detailed …

Porous silicon nitride is a promising material for many advanced applications due to its
many outstanding properties. In this work, porous silicon nitride was fabricated at 1200° C …

The commercial use of Si3N4 ceramics in the biomedical field dates back to the early 1980s
and, initially, did not show promising results, which is why their biocompatibility was not then …

In the work, single-phase β-SiAlON was prepared from a powder mixture based on
aluminum ferrosilicon and aluminosilicate (kaolin) with nitrogen-containing additives …

Si 3 N 4 reticulated porous ceramics (RPC) were prepared by twice-sintering and replication
techniques. The α-Si 3 N 4 and Si powder in raw materials were partially transformed into …

In this research, the authors have prepared mullite-containing ceramics by mixing Sedlecky
ml kaolin, Nabalox 315 alumina and corn starch as a bio-origin additive. Pellets were …

This work was focused primarily on the investigation of the parameters effecting the
formation of β-SiC and their crystallite diameter. Previous works revealed that the …

In this study, Si 3 N 4 foams are successfully produced by a combination of replica and
carbothermal reduction and nitridation (CRN) methods. Slurries prepared from C, SiO 2 …

In the study, the fabrication processes of the Al/p-Si (MS), Al/ZnO/p-Si (MIS1), and Al/(ZnO: Si
3 N 4)/p-Si (MIS2) structures were described and the effect of the ZnO: Si 3 N 4 interface …