Dry reforming of methane: Influence of process parameters—A review
This review will explore the influences of the active metal, support, promoter, preparation
methods, calcination temperature, reducing environment, particle size and reactor choice on …
methods, calcination temperature, reducing environment, particle size and reactor choice on …
Fluidization of nanopowders: a review
JR van Ommen, JM Valverde, R Pfeffer - Journal of nanoparticle research, 2012 - Springer
Nanoparticles (NPs) are applied in a wide range of processes, and their use continues to
increase. Fluidization is one of the best techniques available to disperse and process NPs …
increase. Fluidization is one of the best techniques available to disperse and process NPs …
Theoretical and experimental study on the fluidity performance of hard-to-fluidize carbon nanotubes-based CO2 capture sorbents
MJ Nobarzad, M Tahmasebpoor, M Heidari… - Frontiers of Chemical …, 2022 - Springer
Carbon nanotubes-based materials have been identified as promising sorbents for efficient
CO2 capture in fluidized beds, suffering from insufficient contact with CO2 for the high-level …
CO2 capture in fluidized beds, suffering from insufficient contact with CO2 for the high-level …
CO2 capture and fluidity performance of CaO-based sorbents: Effect of Zr, Al and Ce additives in tri-, bi-and mono-metallic configurations
Abstract The Calcium-looping (CaL) technology is based on the reversible carbonation
reaction of CaO with CO 2 and has been developing rapidly as a potential low cost process …
reaction of CaO with CO 2 and has been developing rapidly as a potential low cost process …
Gas–solid fluidization of cohesive powders
Fine and ultrafine powders (down to nanoparticles) have recently received growing interest
in both industrial and academic sectors due to their very distinctive features, mainly coming …
in both industrial and academic sectors due to their very distinctive features, mainly coming …
Atomic layer deposition on particles using a fluidized bed reactor with in situ mass spectrometry
A fluidized bed reactor (FBR) was designed and constructed for the delivery of reactive
gases to particle surfaces to functionalize particles at large scale using atomic layer …
gases to particle surfaces to functionalize particles at large scale using atomic layer …
Characterization of aerogel Ni/Al2O3 catalysts and investigation on their stability for CH4-CO2 reforming in a fluidized bed
Z Hao, Q Zhu, Z Jiang, B Hou, H Li - Fuel Processing Technology, 2009 - Elsevier
The CH4-CO2 reforming was investigated in a fluidized bed reactor using nano-sized
aerogel Ni/Al2O3 catalysts, which were prepared via a sol–gel method combined with a …
aerogel Ni/Al2O3 catalysts, which were prepared via a sol–gel method combined with a …
Fluidized bed synthesis of carbon nanotubes–A review
Carbon nanotube is one of the most talked about materials in recent years due to its unique
properties and potential applications in different fields. Out of different techniques, catalytic …
properties and potential applications in different fields. Out of different techniques, catalytic …
Progress in powder coating technology using atomic layer deposition
S Adhikari, S Selvaraj, DH Kim - Advanced Materials Interfaces, 2018 - Wiley Online Library
Atomic layer deposition (ALD) has found versatile applications in energy, environmental,
and anthropogenic systems. The self‐terminating surface chemistry characteristic of ALD …
and anthropogenic systems. The self‐terminating surface chemistry characteristic of ALD …
Analysis of the bubbling behaviour of 2D gas solid fluidized beds: Part I. Digital image analysis technique
A Busciglio, G Vella, G Micale, L Rizzuti - Chemical Engineering Journal, 2008 - Elsevier
Bubble characteristics are very important in the design of fluidized beds because they
govern hydrodynamics and efficiency of the operation for which the bed is used. In this work …
govern hydrodynamics and efficiency of the operation for which the bed is used. In this work …