Low-temperature cracks (LTC) and intermediate-temperature cracks (ITC) are two important
types of cracks in asphalt mixtures that cause damage to pavements and incur high …

Mineral filler, fine-grained mineral particles naturally present in or manufactured and added
to aggregates play a significant role on the performance of asphalt mastic and asphalt …

The primary objective of this article was to investigate the feasibility of steel slag as fillers,
particularly the fillers milled from raw steel slag with different particle size, also the steel slag …

This paper discusses the feasibility of reusing steel slag as mineral filler in an asphalt
mixture. Steel slag aggregate was first crushed and ground into filler with particles smaller …

The generation and accumulation of molybdenum tailings (MT) have led to various
environmental problems. This paper explores the feasibility of MT as a filler instead of …

The present study evaluates the impacts of Nano hydrated lime filler (NHL) on fatigue
damage potential of asphalt mastic and a comparative analysis with hydrated lime filler (HL) …

Asphalt pavement experiences various deteriorations in different weather conditions due to
the viscoelastic nature of asphalt binder. This study aims to develop a high-performance …

The experimental investigation herein described is aimed at understanding the effects of
cellulose-based fibers on the mechanical properties of bituminous mastics for paving …

Low temperature cracking is one of the main distresses of asphalt pavement in cold regions.
Stress relaxation characteristics is critical for cracking resistance of asphalt materials …

This study evaluated four types of zinc production waste and limestone powder to be used
as filler in asphalt mixtures. The properties of the fillers, asphalt mastic and mixtures made …