Severe plastic deformation (SPD) has established itself as a potent means of producing bulk
ultrafine grained and nanostructured materials. It has given rise to burgeoning research that …

AA1050/AA6061 multilayer composites were processed by combining accumulative roll
bonding (ARB) and cryorolling, followed by aging. The microstructure evolution and …

A 3D finite element model was developed. The accuracy of the model was verified through a
rolling experiment in which the reduction rate of the plate was 50%. The metal flow law in the …

Metal alloys designated for cold metal working exhibit much higher strength properties than
pure materials due to solid-solution hardening. However, with the increase of mechanical …

Background The severe plastic deformation approach and its well-known cyclic extrusion
compression (CEC) method have been established as a powerful tool for fabricating bulk …

Dissimilar linear friction welding (LFW) of AA5052/AA6061 was performed at different
applied pressures. A dissimilar joint obtained at a high applied pressure of 200 MPa …

A Cu alloy with discontinuous precipitation (DP) presents a mechanically lower strength, but
a higher conductivity compared to an alloy with continuous precipitation (CP). We controlled …

Linear friction welding (LFW) was performed on face-centered cubic materials, that is, Al
alloys (AA1050 and AA5052) with different stacking fault energies (SFEs). The pressure was …

The final microstructure of materials under interactive effects of critical elements of
deformation: strain, strain-rate, and temperature, often follows complex trajectories …

The rare molybdenum resources are being increasingly used in heavy industries. In this
study, the common unidirectional and cross hot rolling operations, for pure molybdenum …