Titanium-magnesium composites have gained increasing attention as a partially degradable
biomaterial recently. The titanium-magnesium composite combines the bioactivity of …

In this research, cold sprayed Al coating layer on AZ31B Mg alloy was coated with cold
sprayed Ti and Ta/Ti coatings, which noticeably reduced the wear rate of Al coated Mg alloy …

This study employs advanced electrochemical and surface characterization techniques to
investigate the impact of electrochemical hydrogen charging on the corrosion behavior and …

Calcium-phosphate (CaP) coatings have been widely used in the field of biodegradable
magnesium alloys. This paper provides a novel pretreatment method before depositing CaP …

Besides electrochemical corrosion protection, laser shock peening provides extended
fatigue life and mechanical properties for metals, as reported in the literature. However, most …

Anodic electrochemical behaviors of the titanium matrix composites (TiB+ TiC)/Ti6Al4V in 10
wt% NaNO 3 and NaCl electrolytes are reported for the first time. The corrosion resistance is …

In this study, the AZ91-bioactive glass surface composite wires were created using a unique
method called friction stir back extrusion (FSBE). The microstructure, mechanical properties …

The electrochemical stability of Ni-Ti-O nanoporous layers anodically grown on the
equiatomic NiTi alloy is assessed by immersion in deionized water and phosphate buffered …

In this study, the effect of severe plastic deformation via friction stir back extrusion on
microstructure, mechanical properties, and corrosion behavior of AZ91-Ca alloy were …

Abstract Although Ni–Ti–O nanopores (NPs) can be fabricated by anodization of
mechanically polished NiTi alloys, the top disordered layer is difficult to remove thus …