The nitriding process typically involves the introduction of nitrogen into the surface-adjacent
zone of a component, usually at a temperature between 500 and 580 deg C. This article …

With the aim of achieving a better understanding of the nitriding process of iron-based
components (steels), as applied in engineering practice, the theoretical background and …

To better understand the behavior of M50NiL steel under carburizing and nitriding duplex
treatment, different carburizing temperatures (ranging from 890 to 980° C) were used for the …

Critical current density, J c, in superconductors is strongly connected with size of defects in
the material. Frequently, the smaller defects, the higher J c. In this work, we tried to reduce …

We perform a systematic ab initio study of the electronic and atomic structure of
semicoherent interfaces between bcc Fe and NaCl MX (M= Sc, Ti, V, Cr, Zr, Nb, Hf, Ta; X= C …

A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400° C)
is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched …

A study was performed to investigate the surface hardening mechanism of H13 steel after
shot peening and ion nitriding. The shot peening process was used as a pre-treatment …

L'éco-conception est, depuis peu, une nouvelle problématique, que l'entreprise pourrait bien
prendre en compte pour en tirer, à terme, un avantage concurrentiel. C'est concevoir des …

Upon nitriding of iron-based alloys, development of misfitting coherent nitride precipitates in
a ferrite matrix induces an overall expansion of the ferrite lattice. This lattice expansion was …

The crystal structure and morphology of nitride precipitates developing in the matrix of a Fe-
1.5 wt pct Cr-1.5 wt pct Al (Fe-1.6 at. pct Cr-3.1 at. pct Al) alloy upon gas nitriding were …