Technologies for applying Ni-Au coatings to heat sinks of SiC-Al metal matrix composite material

SM Gorbatyuk, AN Pashkov, IG Morozova… - Materials Today …, 2021 - Elsevier
This article focuses on development and research of coating technology Ni-Au on heat sink
bases of metal matrix composite SiC-Al. In the development of technology as a base was …

Simulation of upsetting process using kinematic schemes of metal flow

KN Solomonov, LI Tishchuk, SN Lezhnev… - IOP Conference …, 2020 - iopscience.iop.org
The problems of simulation the on the basis of kinematic schemes of metal flow, which is
observed in the processes of forging and stamping workpieces with flat areas, are …

Method of calculating volumetric scaffold of monolithic slab formwork

VE Kondratenko, VV Devyatiarova… - IOP Conference …, 2020 - iopscience.iop.org
Currently, when designing various residential buildings, there has been a tendency to use
monolithic reinforced concrete to cover significant spans, often using structures with a …

Theoretical interpretation of the function of changing the tractive effort of a quarry locomotive in the starting mode

E Balakhnina, G Vykhodtseva, E Sizova… - AIP Conference …, 2022 - pubs.aip.org
The process of starting a locomotive usually consists of two phases-initial and final. During
the start-up process, it matters how the traction force changes during each of the start-up …

Investigation of the dependence of the friction coefficient change on the speed under rational starting modes of a quarry locomotive

E Balakhnina, E Sizova, G Vykhodtseva… - AIP Conference …, 2022 - pubs.aip.org
On the basis of the mathematical model of the process of controlled start-up of a quarry
locomotive, which is an exponential dependence of the relative traction coefficient on the …

Optimization of the Interelectrode Gap in Electrical Discharge Grinding with Changing Electrode Polarity

R Strelchuk, O Shelkovyi - Design, Simulation, Manufacturing: The …, 2021 - Springer
The paper investigates the process of electrical discharge diamond grinding with changing
the polarity of electrodes in time in the cutting zone for processing various materials, and the …

Systematization of the mineral raw material waste recycling process

A Bardovsky, I Basyrov… - MATEC Web of …, 2021 - matec-conferences.org
The paper considers a system for optimizing the recycling process of mineral raw material
waste in terms of the target function, which takes into account economic, technological, and …

Method for calculating the shape of rolls for helical rolling

SM Gorbatyuk, TV Deniskina… - IOP Conference …, 2021 - iopscience.iop.org
The paper is devoted to solving the problem of determining the shape of the rolls of helical
rolling mills, depending on the specified profile of the deformation zone. A universal …

Additive Technology Methods for Manufacturing Permanent Magnets

D Efremov, A Gerasimova, N Kislykh… - MATEC Web of …, 2021 - matec-conferences.org
The paper presents the results of studying the possibility of using the selective laser melting
method for production of permanent magnets. This process allows to manufacture not only …

Mathematical control model of secondary coextrusion composition preparation

VV Dyadichev, AV Kolesnikov… - IOP Conference Series …, 2020 - iopscience.iop.org
The control of polymer waste recycling process is an important modern problem. A partial
solution to the problem can be got by using coextrusion technology. As a result of its …