Effect of Al2TiO5 Content and Sintering Temperature on the Microstructure and Residual Stress of Al2O3–Al2TiO5 Ceramic Composites
K Fan, W Jiang, J Ruiz-Hervias, C Baudín, W Feng… - Materials, 2021 - mdpi.com
A series of Al2O3–Al2TiO5 ceramic composites with different Al2TiO5 contents (10 and 40
vol.%) fabricated at different sintering temperatures (1450 and 1550° C) was studied in the …
vol.%) fabricated at different sintering temperatures (1450 and 1550° C) was studied in the …
Microstructures and mechanical properties of Ti3SiC2/TiC–Al2O3 composites synthesized by reactive hot pressing
Y Cai, H Yin, L Pan, P Chen, G Sun - Materials Science and Engineering: A, 2013 - Elsevier
Ti3SiC2/TiC–Al2O3 composites with different Al2O3 contents were fabricated by in-situ
reaction and hot pressing sintering. Laminar Ti3SiC2 grains and granular Al2O3 grains were …
reaction and hot pressing sintering. Laminar Ti3SiC2 grains and granular Al2O3 grains were …
Characterization of a bilayer WC–Co hardmetal using Hertzian indentation technique
H Zhang, ZZ Fang, Q Lu - International Journal of Refractory Metals and …, 2009 - Elsevier
Functionally graded materials (FGMs) incorporate gradual transitions in their microstructure
and/or composition with distance. The greatest merit of FGM in the design and processing of …
and/or composition with distance. The greatest merit of FGM in the design and processing of …
The effect of microstructure evolution on mechanical properties in novel alumina-montmorillonite composites
Fabrication of alumina matrix composites reinforced with montmorillonite (MMT) is
introduced in this work. Specimens were prepared with the use of powder metallurgy and …
introduced in this work. Specimens were prepared with the use of powder metallurgy and …
Microstructural and decomposition rate studies of periclase-added aluminum titanate–corundum functionally-graded materials
S Pratapa, K Umaroh, E Weddakarti - Materials Letters, 2011 - Elsevier
Microstructural characterization using XRD and EDS elemental mapping on periclase-
added aluminum titanate–corundum functionally-graded materials produced by the multiple …
added aluminum titanate–corundum functionally-graded materials produced by the multiple …
Synthesis of rutile-rich corundum/rutile functionally-graded materials with different precursors
S Pratapa, K Umaroh… - Indonesian Journal of …, 2011 - ijphysics.fi.itb.ac.id
Synthesis of corundum/rutileFGMS had been done with five repeated infiltrations. Preforms
were made from corundum powder which were presintered at 1000 C for 1 hour to obtain …
were made from corundum powder which were presintered at 1000 C for 1 hour to obtain …
Study and development of novel composite materials for the application of car brake rotor
PRK Fu - 2014 - espace.curtin.edu.au
From experimental study of properties including density, tensile strength, Young's modulus,
fracture toughness for both aluminium alloy reinforced with silicon carbide and aluminium …
fracture toughness for both aluminium alloy reinforced with silicon carbide and aluminium …