The present review covers the heat transfer literature published in 2004 in English
language, including some translations of foreign language papers. Though extensive, some …

It remains a longstanding challenge to recover the waste heat from molten slags in pursuit of
lower energy and carbon intensity in the metallurgical industry. To tap the heat from molten …

The aim of the present study was to investigate the influence of solidification thermal
variables on the as-cast microstructure of hypoeutectic Al–Si alloys and to establish …

Investigations have been made of the solidification structure of three hypoeutectic Al–Fe
alloys, which were directionally solidified under unsteady-state heat flow conditions. The …

Al-Ni hypoeutectic alloys were directionally solidified under upward transient heat flow
conditions. The aim of the present study is to set up correlations between the as-cast …

The present study describes the development of an experimental set-up representing the
metal/mold system of a rotary continuous caster as part of a methodology, which connected …

Porosity is one of the most important defects in metals casting. In this study,
macrosegregation and porosity formation were investigated by a numerical model and by …

Recent studies of lead-antimony alloys, used for the production of positive electrodes of lead-
acid batteries, have assessed the influences of both the microstructural morphology and of …

Centrifugal granulation technique is the most feasible method for heat recovery from molten
blast furnace (BF) slag. The granulated slag droplets experience a complex cooling process …

Blast furnace (BF) slag is the principal byproduct formed during the iron-making process,
which generates a considerable amount of thermal energy. However, to simultaneously …