The characterization and optimization of the microstructures of materials pertaining to
material properties is a primitive necessity to ensure the performance and service life of the …

Nickel-based superalloys are widely used in aircraft engines and land-based gas turbines
due to their high yield strength and good creep resistance. Co in nickel-based superalloys …

AISI 301 stainless steel samples were annealed over the temperature range of 800–1200° C
for 60 minutes to produce different grain sizes. These samples were characterized by …

A Co-rich nickel based superalloy with different size of γ׳ precipitates is obtained through
varied aging time. Microstructures after tensile deformation at intermediate temperature are …

Materials for advanced ultra-supercritical (A-USC) power plants with steam temperatures of
700° C and above are extremely needed in order to achieve high efficiency and low CO 2 …

The variation in hardness and tensile properties of Ni-based single crystal (SX) superalloy
DD6 during laser metal deposition processing has been investigated, and the effects of laser …

Electron beam layer solidification was used to prepare a nickel-based superalloy with
refined microstructure and superior creep performance. It suggests that MC carbides could …

This paper presents a hybrid design strategy for the determination of the optimum laser
drilling parameters which simultaneously meets the requirements for seven quality …

In the present study, pulse echo overlap method (PEO) has been used as a non-destructive
technique for evaluating the mechanical properties of Al/SiC nanocomposites. The nano …

Tensile fracture behaviors of Nimonic 263 after three different heat treatments have been
investigated. Standard heat treatment produces 10% γ′ coupled with precipitate free zones …