New insights into the effect of Al on the selective oxidation of advanced high-strength steels prior to hot-dip galvanizing
Z Liu, J Nie, Y Song, X Yang, W Mao, X Jin, X Zhang… - Acta Materialia, 2024 - Elsevier
Advanced high-strength steels (AHSSs) enable the manufacture of lighter, safer and more
energy-saving body-in-white. However, the poor galvanizability induced by the surface …
energy-saving body-in-white. However, the poor galvanizability induced by the surface …
Effect of prior copper-coating on the microstructural development and corrosion behavior of hot-dip galvanized Mn containing high strength steel sheet
In the present investigation, the role of copper (Cu) pre-coating has been studied for the
development of good quality corrosion-resistant hot-dip galvanized (GI) coating on high …
development of good quality corrosion-resistant hot-dip galvanized (GI) coating on high …
Oxidation kinetics of Fe-(2-10) Mn-xSb alloys during annealing
B Pourbahari, JR McDermid - Materialia, 2023 - Elsevier
The selective oxidation kinetics of a series of Fe-(2-10) Mn-(0.00/0.01/0.03) Sb (at. pct) were
determined and a model was proposed for analyzing oxide growth during intercritical …
determined and a model was proposed for analyzing oxide growth during intercritical …
Surface selective oxidation of Sn-added CMnSi TRIP steel
The influence of the addition of Sn on the selective oxidation and the reactive wetting of
CMnSi transformation-induced plasticity (TRIP) steels was studied by means of galvanizing …
CMnSi transformation-induced plasticity (TRIP) steels was studied by means of galvanizing …
Selective oxidation of a medium-Mn third generation advanced high strength steel during austenitizing and intercritical annealing
KMH Bhadhon, JR McDermid - Journal of The Electrochemical …, 2022 - iopscience.iop.org
The effect of the simulated continuous galvanizing line N 2− 5 vol% H 2 process atmosphere
oxygen partial pressure (pO 2) on the external and internal selective oxidation of a prototype …
oxygen partial pressure (pO 2) on the external and internal selective oxidation of a prototype …
[HTML][HTML] Selective oxidation of ternary Fe-Mn-Si alloys during annealing process
X Zhang, CC da Silva, C Liu, M Prabhakar… - Corrosion …, 2020 - Elsevier
Abstract Selective oxidation of Fe2MnxSi alloys with various Si contents annealed in a gas
mixture of H 2/H 2 O (p (O 2)= 6.5× 10− 25 bar at 700° C) for 2 h was investigated. The …
mixture of H 2/H 2 O (p (O 2)= 6.5× 10− 25 bar at 700° C) for 2 h was investigated. The …
Influence of minor alloying elements on selective oxidation and reactive wetting of CMnSi TRIP steel during hot dip galvanizing
L Cho, MS Kim, YH Kim, BC De Cooman - Metallurgical and Materials …, 2014 - Springer
The influence of the addition of minor alloying elements on the selective oxidation and the
reactive wetting of CMnSi transformation-induced plasticity (TRIP) steels was studied by …
reactive wetting of CMnSi transformation-induced plasticity (TRIP) steels was studied by …
Effect of Annealing Atmosphere and Steel Alloy Composition on Oxide Formation and Radiative Properties of Advanced High-Strength Steel Strip
K Lin, M Pourmajidian, FK Suleiman… - … Materials Transactions B, 2022 - Springer
This study elucidates the effect of alloy composition, annealing atmosphere, and pre-
annealed surface state on the radiative properties of dual-phase (DP) steels. Twelve …
annealed surface state on the radiative properties of dual-phase (DP) steels. Twelve …
Effect of dew point on the reactive wetting of a C-2Mn-1.3 Si (wt%) advanced high strength steel during continuous galvanizing
GS Mousavi, JR McDermid - Surface and Coatings Technology, 2018 - Elsevier
The effect of oxygen partial pressure on the reactive wetting of a Fe-0.1 C-2Mn-1.3 Si (wt%)
advanced high strength steel during continuous galvanizing was determined. The steel was …
advanced high strength steel during continuous galvanizing was determined. The steel was …
Selective oxidation of a C-2Mn-1.3 Si (Wt Pct) advanced high-strength steel during continuous galvanizing heat treatments
G Seyed Mousavi, JR McDermid - Metallurgical and Materials Transactions …, 2018 - Springer
The influence of oxygen partial pressure and annealing time on the selective oxidation of a
Fe-0.1 C-2Mn-1.3 Si (wt pct) advanced high-strength steel during intercritical annealing was …
Fe-0.1 C-2Mn-1.3 Si (wt pct) advanced high-strength steel during intercritical annealing was …