This paper provides an overview over the application of scanning macro-XRF with mobile
instruments for the investigation of historical paintings. The method is compared to …

A new Powder-bed Arc Additive Manufacturing (PAAM) processing which includes on-line
remelting of deposited material has been developed for the manufacturing of high entropy …

Abstract Plasma Electrolytic Oxidation (PEO) and Hard Anodizing (HA) coatings are
investigated on an Additively Manufactured (AM) Al10Si1Mg alloy obtained via Direct Metal …

Mo 2 C/Ti64 composites with nearly full densification and enhanced tensile strength were
developed by using laser powder bed fusion (LPBF). The addition of 1–3 wt% Mo 2 C …

The columnar to equiaxed transition (CET) of grain structures has been a great challenge
during titanium alloy additive manufacturing (AM), especially for wire arc additive …

This review describes advances in the XRF group of techniques published approximately
between April 2016 and March 2017. With technique maturity, it is the sample rather than the …

X-ray fluorescence (XRF) spectroscopy is a common technique in the field of heritage
science. However, data processing and data interpretation remain a challenge as they are …

The effects of heating rate on the alloy element partitioning and mechanical properties
during the phase transformation of α→ β in Ti-6Al-4 V alloy under solution treatment have …

L'imagerie hyperspectrale permet l'acquisition d'informations représentatives sur les objets
du patrimoine culturel. Pour une identification complète des composés chimiques présents …

The 15th century painting marked a transition in the pictorial technique due to the
introduction of oil painting. Antonello de Saliba is a remarkable Sicilian painter that helped …