Intergranular and interphase microstresses
Recent advances in the characterisation and modelling of microstresses developed
between grains and phases in a polycrystal are reviewed. The evolution of microstresses in …
between grains and phases in a polycrystal are reviewed. The evolution of microstresses in …
[图书][B] Introduction to the characterization of residual stress by neutron diffraction
MT Hutchings, PJ Withers, TM Holden, T Lorentzen - 2005 - taylorfrancis.com
Over the past 25 years the field of neutron diffraction for residual stress characterization has
grown tremendously, and has matured from the stage of trial demonstrations to provide a …
grown tremendously, and has matured from the stage of trial demonstrations to provide a …
Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy
We studied the deformation behavior of CrFeCoNi high-entropy alloy by in situ neutron
diffraction at room temperature, intermediate low temperature of 140 K, low temperatures of …
diffraction at room temperature, intermediate low temperature of 140 K, low temperatures of …
Internal strain and texture evolution during deformation twinning in magnesium
The development of a twinned microstructure in hexagonal close-packed rolled magnesium
compressed in the in-plane direction has been monitored in situ with neutron diffraction. The …
compressed in the in-plane direction has been monitored in situ with neutron diffraction. The …
The influence of the support structure on residual stress and distortion in SLM Inconel 718 parts
T Mishurova, S Cabeza, T Thiede, N Nadammal… - … materials transactions A, 2018 - Springer
The effect of support structure and of removal from the base plate on the residual stress state
in selective laser melted IN718 parts was studied by means of synchrotron X-ray diffraction …
in selective laser melted IN718 parts was studied by means of synchrotron X-ray diffraction …
Revealing the effect of heat treatment on stress corrosion cracking behavior of Monel 400 alloy in hydrofluoric acid vapor environment
The effect of heat treatment (HT) on the stress corrosion cracking (SCC) of Monel 400 alloy
in hydrofluoric acid (HF) vapor was investigated through cracking crystallographic analysis …
in hydrofluoric acid (HF) vapor was investigated through cracking crystallographic analysis …
VULCAN—The engineering diffractometer at the SNS
The VULCAN diffractometer at the Spallation Neutron Source (SNS) is designed to tackle a
broad range of problems in materials science and engineering, including spatial mapping of …
broad range of problems in materials science and engineering, including spatial mapping of …
[HTML][HTML] Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625
Residual stresses in metal additive manufactured components are a well-known problem. It
causes distortion of the samples when removing them from the build plate, as well as acting …
causes distortion of the samples when removing them from the build plate, as well as acting …
Residual stress in selective laser melted Inconel 718: influence of the removal from base plate and deposition hatch length
T Thiede, S Cabeza, T Mishurova… - Materials …, 2018 - asmedigitalcollection.asme.org
The residual stress distribution in IN718 elongated prisms produced by selective laser
melting was studied by means of neutron (bulk) and laboratory X-ray (surface) diffraction …
melting was studied by means of neutron (bulk) and laboratory X-ray (surface) diffraction …
Influence of directional strength-to-stiffness on the elastic–plastic transition of fcc polycrystals under uniaxial tensile loading
Crystal-based finite element simulations have been conducted on virtual face-centered
cubic polycrystals under uniaxial tensile loading to study the influence of single crystal …
cubic polycrystals under uniaxial tensile loading to study the influence of single crystal …