The evolution of micro-and macrostresses in a duplex stainless steel during loading has
been investigated in situ by X-ray diffraction. A 1.5 mm cold-rolled sheet of alloy SAF 2304 …

Dislocation structures in bands corresponding to cyclic strain localisation have been studied
in two types of stainless steels, single phase austenitic 316L steel and two-phase austenitic …

Strain field measurements by digital image correlation today offer new possibilities for
analysing the mechanical behaviour of materials in situ during mechanical tests. The …

The kinetics of short crack growth has been studied in austenitic‐ferritic 2205 duplex
stainless steel. Smooth cylindrical specimens and specimens with shallow notch were …

A low-cycle fatigue test was carried out at room temperature on a forged duplex stainless
steel type 25-07 alloyed with 0.17% nitrogen. From EBSD measurements performed before …

Fatigue test data of cold rolled strip steels, a duplex stainless steel and a martensitic
stainless steel, was generated in the Very High Cycle Fatigue (VHCF) regime. Testing was …

Deformation‐induced mechanisms, namely, transformation‐induced plasticity (TRIP) and
twinning‐induced plasticity (TWIP), are primarily responsible for improved tensile properties …

The latest PIE results of Zry-2 and HiFi alloy (0.4% Fe-Zry2) showed that iron addition
reduces the hydrogen pick-up ratio. In order to clarify this lower hydrogen absorption …

The cyclic hardening–softening response, the cyclic stress–strain curve (CSSC) and the
substructure evolution within the constitutive phases of a high nitrogen superduplex …

The effect of nitrogen content on the corrosion fatigue crack growth (FCG) behavior of 22%
Cr duplex stainless steel (DSS) in chloride solution was investigated. Corrosion fatigue …