[HTML][HTML] Subtractive manufacturing of stable hierarchical micro-nano structures on AA5052 sheet with enhanced water repellence and durable corrosion resistance
X Li, T Shi, B Li, X Chen, C Zhang, Z Guo, Q Zhang - Materials & Design, 2019 - Elsevier
Preparing super-hydrophobic surfaces with additive manufacturing (AM) and multi-step
processes improves corrosion resistance of Al alloys. But the incorporation of dissimilar …
processes improves corrosion resistance of Al alloys. But the incorporation of dissimilar …
Microstructure and mechanical properties of Sn–Bi, Sn–Ag and Sn–Zn lead-free solder alloys
WR Osório, LC Peixoto, LR Garcia… - Journal of Alloys and …, 2013 - Elsevier
The aim of this paper is to develop a comparative evaluation of mechanical properties of as-
cast Sn–Bi, Sn–Ag and Sn–Zn alloys as a function of the resulting microstructural arrays with …
cast Sn–Bi, Sn–Ag and Sn–Zn alloys as a function of the resulting microstructural arrays with …
Electrochemical behavior and compressive strength of Al-Cu/xCu composites in NaCl solution
YA Meyer, RS Bonatti, AD Bortolozo… - Journal of Solid State …, 2021 - Springer
This experimental investigation is focused on the evaluation of the compressive strength and
corrosion behavior of Al-5Cu/xCu composites with Cu content, varying of 0, 1, 3, and 5 wt …
corrosion behavior of Al-5Cu/xCu composites with Cu content, varying of 0, 1, 3, and 5 wt …
Monolithic nanoporous In–Sn alloy for electrochemical reduction of carbon dioxide
Nanostructured metal catalysts to convert CO2 to formate, which have been extensively
studied over decades, have many problems such as durability, lifetime, high process …
studied over decades, have many problems such as durability, lifetime, high process …
Characterization of dendritic microstructure, intermetallic phases, and hardness of directionally solidified Al-Mg and Al-Mg-Si alloys
Despite the widespread application of Al-Mg-Si alloys, especially in the automotive industry,
interrelations of solidification thermal parameters (cooling rate and growth rate) …
interrelations of solidification thermal parameters (cooling rate and growth rate) …
[HTML][HTML] Few-layered graphene reinforced Al-10 wt% Si-2 wt% Cu matrix composites
Few-layered graphene (FLG) reinforced Al-10 wt% Si-2 wt% Cu (Al10Si2Cu) matrix
composites were fabricated via a powder metallurgical route. FLG powders were produced …
composites were fabricated via a powder metallurgical route. FLG powders were produced …
[HTML][HTML] Precipitation behavior during re-aging of Al-Mg-Si-Cu alloy
H Jin, D Tie, R Guan - Materials & Design, 2022 - Elsevier
Nano-scaled L phase, β′′ phase, Q′ phase and their composite phases can effectively
strengthen Al-Mg-Si-Cu alloys, and balance the mechanical properties and electrical …
strengthen Al-Mg-Si-Cu alloys, and balance the mechanical properties and electrical …
Microstructure features and mechanical/electrochemical behavior of directionally solidified Al− 6wt.% Cu− 5wt.% Ni alloy
The effects of the addition of 5.0 wt.% Ni to an Al− 6wt.% Cu alloy on the solidification
cooling rate T˙ growth rate (VL), length scale of the representative phase of the …
cooling rate T˙ growth rate (VL), length scale of the representative phase of the …
Horizontally solidified Al–3 wt% Cu–(0.5 wt% Mg) alloys: tailoring thermal parameters, microstructure, microhardness, and corrosion behavior
In the present experimental investigation, Al–3 wt% Cu and Al–3 wt% Cu–0.5 wt% Mg alloys
castings are produced by a horizontal solidification technique with a view to examining the …
castings are produced by a horizontal solidification technique with a view to examining the …
Compaction pressure and Si content effects on compressive strengths of Al/Si/Cu alloy composites
This paper is focused on the effect of distinctive compaction pressures and Si content on the
resulting morphologies and compressive strengths (CS) of the sintered and quenched …
resulting morphologies and compressive strengths (CS) of the sintered and quenched …