Hot working behavior of 26NiCrMoV 14-5 steel was investigated by performing hot
compression testing at a temperature range of 850–1150° C and strain rates of 0.001–1s− 1 …

The hot working behavior of VCN200 medium carbon low alloy steel was analyzed by
performing hot compression tests in temperature range of 850–1150° C and at strain rates of …

The surface of 40CrNiMo steel was quenched with a CO 2 laser, Charpy impact test was
conducted at temperatures of 20, 0, and− 20° C, and the impact absorption energies were …

The direct quenching (DQ) process is essential not only for achieving the desired
microstructure distribution in steel heat treatment but also for reducing energy consumption …

Thermal mechanical loadings in machining process would promote material microstructure
changes. The material microstructure evolution, such as grain size evolution and phase …

Microstructure and mechanical properties of a high strength low alloy steel with different
quenching processes were researched. The results indicated that the prior austenite grains …

Abaqus software is used to simulate the deformation behavior of typical steel materials
during the shearing process, and to analyze the displacement change of the materials …

Large marine crankshaft is the heart of medium-speed diesel engine. The TR forming
method used to obtain full-fiber workpiece is considerably complex. However, the metal flow …

The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the
temperature range of 1000–1200° C and the strain rate range of 0.004–0.5 s-1 in order to …

Activation energy at hot forming is an important material constant, which depends on
chemical composition and microstructure of the given material. It is used for example for …