[HTML][HTML] Mechanical properties, wear and corrosion behavior of copper matrix composites reinforced with steel machining chips
KK Alaneme, BU Odoni - … science and technology, an international journal, 2016 - Elsevier
The mechanical properties, wear and corrosion behavior of copper matrix composites
reinforced with steel machining chips was investigated in this research. Steel machining …
reinforced with steel machining chips was investigated in this research. Steel machining …
[HTML][HTML] Strengthening aluminum matrix composite with additively manufactured 316L stainless steel lattice reinforcement: Processing methodology, mechanical …
This study investigates various processing approaches, interface characteristics, and
mechanical properties of an aluminum (Al) matrix composite reinforced with additively …
mechanical properties of an aluminum (Al) matrix composite reinforced with additively …
Mechanical properties and microstructure characterization of well-dispersed carbon nanotubes reinforced copper matrix composites
H Deng, J Yi, C Xia, Y Yi - Journal of Alloys and Compounds, 2017 - Elsevier
Copper (Cu) matrix composites reinforced with 0.3, 0.5, 1.0, and 2.0 vol% multi-wall carbon
nanotubes (MWCNTs) were processed by ultrasonication and high-energy attritor milling of …
nanotubes (MWCNTs) were processed by ultrasonication and high-energy attritor milling of …
[HTML][HTML] Mechanical properties and corrosion behavior of copper based hybrid composites synthesized by stir casting
In this work, we are reporting development of copper–highly strained stainless steel (HSSS)–
tungsten carbide (WC) hybrid composites as well as their mechanical behavior and …
tungsten carbide (WC) hybrid composites as well as their mechanical behavior and …
Fabrication and investigation of mechanical properties of copper matrix nanocomposite reinforced by steel particle
V Norouzifard, H Naeinzadeh, A Talebi - Journal of Alloys and Compounds, 2021 - Elsevier
Copper matrix nanocomposite reinforced by steel particles was prepared by the casting
method. The disc mill and ball mill instruments were used to produce the steel particles from …
method. The disc mill and ball mill instruments were used to produce the steel particles from …
[HTML][HTML] Promotion of thermomechanical processing of 2-GPa low-alloyed ultrahigh-strength steel and physically based modelling of the deformation behaviour
A low-alloyed ultrahigh-strength steel comprising CrNiMoWMnV was designed based on
thermodynamic calculations and by controlling the microalloying elements to promote …
thermodynamic calculations and by controlling the microalloying elements to promote …
Improving the mechanical properties and coefficient of thermal expansion of molybdenum-reinforced copper using powder metallurgy
M Ahmadein, OA El-Kady… - Materials Research …, 2021 - iopscience.iop.org
This paper presents an experimental study of Cu-Mo alloys prepared by powder metallurgy
(PM) method. Also, improving the dispersion and wettability of Mo in the Cu matrix was …
(PM) method. Also, improving the dispersion and wettability of Mo in the Cu matrix was …
Effect of silicon on the hot deformation behavior of microalloyed TWIP-type stainless steels
In the present study, two vanadium-microalloyed 10Mn-18Cr TWIP-type stainless steels with
low and high Si contents were designed to achieve a stacking fault energy of 25 mJ/m 2. Hot …
low and high Si contents were designed to achieve a stacking fault energy of 25 mJ/m 2. Hot …
Physically based modeling and characterization of hot deformation behavior of twinning-induced plasticity steels bearing vanadium and niobium
A Hamada, A Khosravifard, D Porter… - Materials Science and …, 2017 - Elsevier
In the present work, the hot deformation behavior of four TWIP steels is studied by
conducting compression tests at the strain rates in the range 0.01–5/s and temperatures in …
conducting compression tests at the strain rates in the range 0.01–5/s and temperatures in …
Study on the influence of κ-carbide on the high temperature flow behavior of the medium-Mn lightweight steel: modeling and characterization
D Liu, Z Tong, D Han, H Ding, M Cai, K Zhao… - Materials Science and …, 2024 - Elsevier
Isothermal compression tests were carried out on the Fe-11Mn-10Al-0.9 C medium-Mn
lightweight steel in the temperature range from 800° C to 1100° C and strain rate range from …
lightweight steel in the temperature range from 800° C to 1100° C and strain rate range from …