Effect of SMAW process parameters on similar and dissimilar metal welds: An overview

PK Baghel - Heliyon, 2022 - cell.com
Shielded metal arc welding (SMAW) is the most economical and portable and robust
welding processes which utilizes the power source, electrode holder and electrode to weld …

Studies on residual stresses and structural integrity of the dissimilar gas tungsten arc welded joint of sDSS 2507/Inconel 625 for marine application

AK Maurya, R Chhibber, C Pandey - Journal of Materials Science, 2023 - Springer
This study examined the structural integrity and residual stresses of dissimilar welding
between super duplex stainless steel (sDSS 2507) and Inconel 625 using ER2594 filler wire …

Influence of heat input on weld integrity of weldments of two dissimilar steels

AK Maurya, C Pandey, R Chhibber - Materials and Manufacturing …, 2023 - Taylor & Francis
The present study investigates the influence of heat input on microstructure evolution and
mechanical properties of nitronic steel and super duplex stainless steel dissimilar welded …

Heat input effect on dissimilar super duplex stainless steel (UNS S32750) and nitronic steel (n 50) gas tungsten arc weld: Mechanism, microstructure, and mechanical …

AK Maurya, R Chhibber, C Pandey - Journal of Materials Engineering and …, 2023 - Springer
This research focuses on the effect of heat input of super duplex stainless steel (sDSS 2507)
and nitronic steel (N50) dissimilar welded joints. Two heat input combinations selected as …

Multi-pass arc welding techniques of 12 mm thick super-duplex stainless steel

D Arun, KD Ramkumar, R Vimala - Journal of Materials Processing …, 2019 - Elsevier
The fusion zone microstructure and mechanical properties of UNS S32750 joints obtained
from gas tungsten arc (GTA), gas metal arc (GMA) and flux cored arc (FCA) welding …

Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: A …

M Abbasi, BB Vanani, A Tahaei… - Proceedings of the …, 2024 - journals.sagepub.com
In the present investigation, a new endeavor has been made to analyze the impact of the
secondary process (post-weld heat treatment (PWHT)) as well as Ni addition on the …

Characterization of microstructure, mechanical and corrosion response in AISI 304L and Ti-stabilized 439 stainless steels weld joints

SK Gupta, AP Patil, RC Rathod, V Tandon… - Journal of Manufacturing …, 2023 - Elsevier
The gas tungsten arc welding (GTAW) was employed to weld dissimilar materials of 304L
austenitic stainless steel (ASS) and Ti-stabilized 439 ferritic stainless steel (FSS). Dissimilar …

Study of heat input effects on the microstructure of lean Duplex 2101 shielded metal arc weld and its effect on mechanical properties, corrosion, and scratch behavior

S Gudikandula, A Sharma - Metallography, Microstructure, and Analysis, 2023 - Springer
In the present study, shielded metal arc welding (SMAW) with electrode ER2209 was carried
out on lean duplex grade LDX2101 by varying heat inputs, low heat (LH) 0.85 kJ/mm, and …

Electron backscattered diffraction analysis across the welded interface of post weld heat treated 2205 duplex stainless-steel and 316L austenitic stainless-steel …

A Gupta, KK Verma, R Kumar, CS Perugu… - Journal of Materials …, 2023 - Springer
In the present work, the effect of post weld heat treatment (PWHT) on the microstructure and
micro-texture evolution in 316L austenitic stainless steel (ASS)/2205 duplex stainless steel …

Characteristics of high-temperature heat-affected zones in duplex stainless steels

EM Westin, S Wessman - Welding in the World, 2024 - Springer
The level of ferritization in the high temperature heat-affected zone (HT-HAZ) affects the
weldability of duplex stainless steels. The modern grades show different sensitivity and …