Pitting is a common type of localized corrosion in passive alloys that can cause rapid failure
of material or equipment. In the case of stainless steels, non-metallic inclusions have been …

Localized corrosion triggered by inclusions is prone to metallic material failure. Except for
chemical dissolution of some special inclusions, the principle of galvanic coupling is the …

Pitting behavior of 321 stainless steel (SS) in sodium chloride solution was studied by
potentiostatic pulse technique triggering pits. Pure TiN inclusion and complex inclusion with …

This paper reviews recent studies on the relationships between local electrochemical
properties at the steel/inclusion boundary and pitting corrosion resistance of stainless steels …

This work investigates the localized corrosion behavior of zirconium-treated P110 oil-casing
steel in 3.5 wt% NaCl solution. The influence of inclusions containing zirconium on localized …

Comprehensive investigations on the impact of Ce doping on the pitting resistance of Fe 40
Mn 20 Cr 20 Ni 20 high-entropy alloys in 3.5% NaCl solution were conducted with an …

The micro-zone interface of inclusions with the steel matrix of X70 high-strength pipeline
steel with Al-Ti deoxidization and Mg-Ca compound treatment in the tropical marine …

The influence of inclusions corrosion behavior under multi-factor local corrosion
mechanisms was researched by SKPFM, TOF-SIMS, EBSD, and in-situ corrosion tests. The …

In 1 M NaCl, the pitting potentials of resulfurized Type 304 stainless steel decreased as the
temperature increased from 25 C to 75 C. The dissolution potential of MnS in 0.1 M Na 2 SO …

The effect of sensitization on the pitting potentials at MnS and CrS inclusions in Type 304
stainless steels was assessed. For Type 304 containing MnS inclusions, MnS dissolution …