Microstructure and wear properties of in-situ molybdenum composite coatings by plasma spraying Mo-B4C and MoO3-Al-B4C composite powders
Y Wang, Y Yang, X Wang, W Li, W Tian - Surface and Coatings Technology, 2023 - Elsevier
In this work, in-situ molybdenum composite coatings were prepared by plasma spraying Mo-
B 4 C and MoO 3-Al-B 4 C composite powders. The microstructure, microhardness and dry …
B 4 C and MoO 3-Al-B 4 C composite powders. The microstructure, microhardness and dry …
Microstructure and Wear Resistance of Plasma-Sprayed Molybdenum Coating Reinforced by MoSi2 Particles
J Yan, Z He, Y Wang, J Qiu, Y Wang - Journal of Thermal Spray …, 2016 - Springer
Mo coatings with or without incorporated MoSi 2 were fabricated by atmospheric plasma
spraying, and their microstructure, microhardness, bond strength, and wear resistance were …
spraying, and their microstructure, microhardness, bond strength, and wear resistance were …
[HTML][HTML] Effect of laser-textured substrate on adhesion and microstructure of deposited Mo–NiCrBSiCFe coating
D Jia, D Zhou, P Yi, S Zhang, X Zhan, Y Liu - Journal of Materials Research …, 2024 - Elsevier
The novel application of laser surface texture as a method for enhancing the deposition of
coatings on substrates has garnered significant interest. This study focuses on the use of …
coatings on substrates has garnered significant interest. This study focuses on the use of …
Microstructure and properties of molybdenum composite coatings by plasma spraying of Mo–SiC and MoO3–Al–SiC composite powders
Y Wang, Y Yang, X Wang, W Li, J Gou - Ceramics International, 2024 - Elsevier
To improve the sliding wear resistance of plasma sprayed Mo coating, Mo–SiC and MoO 3–
Al–SiC composite powders were used to prepare Mo composite coatings by plasma …
Al–SiC composite powders were used to prepare Mo composite coatings by plasma …
Investigations on the effect of molybdenum (Mo) and molybdenum silicon carbide (Mo-10% Sic) composite coatings on mild steel substrate using HVOF technique
Surface engineering is a growing technology and a most promising technique which is very
well accepted by most of the material industrialists today. The present work focuses on …
well accepted by most of the material industrialists today. The present work focuses on …
Erosive wear characteristic of Mo-TiN composite coatings on turbocharger compressor wheel using Taguchi experimental design
In the present work, Mo coating (S1) and Mo–TiN coatings with varied compositions (S2: Mo–
5 wt% TiN, S3: Mo–10 wt% TiN, and S4: Mo–15 wt% TiN) were deposited using atmospheric …
5 wt% TiN, S3: Mo–10 wt% TiN, and S4: Mo–15 wt% TiN) were deposited using atmospheric …
A Comparison Study on Wear Behaviors of Mo and Al2O3-Mo Coatings from RT to 300 °C
J Yan, Y Guo, Y Wang, P Zhou, J Qiu - Lubricants, 2018 - mdpi.com
Mo and Al2O3-Mo coatings are fabricated on a low-carbon steel substrate using
atmospheric plasma spraying. The microstructure and mechanical properties of two as …
atmospheric plasma spraying. The microstructure and mechanical properties of two as …
Effect of vacuum hot pressing on plasma-sprayed molybdenum coatings on rail vehicle axle steel
C Liang, M Yu, H Ma, H Chen - Journal of Thermal Spray Technology, 2019 - Springer
Railway axles suffer severe friction damage during service. In this work, a pure molybdenum
coating was prepared on EA4T axle steel by air plasma spraying and hot pressing to …
coating was prepared on EA4T axle steel by air plasma spraying and hot pressing to …
The influence of selected plasma spraying parameters on microstructure and porosity of molybdenum coating
T Kubaszek, P Zgódka, A Słyś, M Góral… - Ochrona przed …, 2022 - yadda.icm.edu.pl
Thermal sprayed molybdenum coating is widely used to decrease friction coefficient of
machine components. Currently, many methods are used to fabricate it on steel substrate …
machine components. Currently, many methods are used to fabricate it on steel substrate …