Effect of boronizing on microstructure, high-temperature wear and corrosion behavior of additive manufactured Inconel 718
In this study, Ni-based Inconel 718 coatings were additively manufactured on the surface of
AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark …
AISI H13 work tool steel by electro-spark deposition (ESD). Some of the electro-spark …
Microstructure of spark plasma sintered TiC–TiB2–SiCw composite
H Yu, AS Namini, SA Delbari, Q Van Le, D Kim… - Materials Chemistry and …, 2022 - Elsevier
This research intends to implement a complementary study on the consolidation and
microstructure of TiC-based ceramics incorporating 30 vol% TiB 2 and 10 vol% SiC whiskers …
microstructure of TiC-based ceramics incorporating 30 vol% TiB 2 and 10 vol% SiC whiskers …
Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites
SH Shafagh, S Jafargholinejad, S Javadian - Synthesis and Sintering, 2021 - synsint.com
The incorporation of 1 wt% hexagonal BN (hBN) into ZrB 2–30 vol% SiC could noticeably
better the fracture toughness, hardness, and consolidation behavior of this composite. This …
better the fracture toughness, hardness, and consolidation behavior of this composite. This …
Oxidation-affected zone in the sintered ZrB2–SiC–HfB2 composites
E Dodi, Z Balak, H Kafashan - Synthesis and Sintering, 2022 - synsint.com
Understanding the behavior of ultra-high temperature ceramics (UHTCs) against oxidation is
of particular importance in high-temperature applications. In this study, ZrB 2–SiC–HfB 2 …
of particular importance in high-temperature applications. In this study, ZrB 2–SiC–HfB 2 …
Complex study of protective Cr3C2–NiAl coatings deposited by vacuum electro-spark alloying, pulsed cathodic arc evaporation, magnetron sputtering, and hybrid …
PV Kiryukhantsev-Korneev, AD Sytchenko… - Ceramics …, 2022 - Elsevier
Coatings were obtained by vacuum electro-spark alloying (VESA), pulsed cathodic arc
evaporation (PCAE), magnetron sputtering (MS) techniques and VESA-PCAE-MS hybrid …
evaporation (PCAE), magnetron sputtering (MS) techniques and VESA-PCAE-MS hybrid …
Combined role of SiC whiskers and graphene nano-platelets on the microstructure of spark plasma sintered ZrB2 ceramics
This research explores the sintering behavior and microstructure of ZrB 2-based materials
containing graphene nano-platelets (GNPs) and SiC whiskers (SiC w). Spark plasma …
containing graphene nano-platelets (GNPs) and SiC whiskers (SiC w). Spark plasma …
Characterization of reactive spark plasma sintered (Zr, Ti) B2–ZrC–SiC composites
This investigation aims to evaluate the influence of SiC introduction on the microstructure
development, mechanical characteristics, and densification behavior of (Zr, Ti) B 2–ZrC …
development, mechanical characteristics, and densification behavior of (Zr, Ti) B 2–ZrC …
Investigation on wear behavior of steels coated with WC by ESD technique
Electro-spark deposition (ESD) or low energy welding (LEW) technique allows the coating of
metallic materials with different metal and alloys, conductive ceramics and conductive …
metallic materials with different metal and alloys, conductive ceramics and conductive …
Characterization of TiC ceramics with SiC and/or WC additives using electron microscopy and electron probe micro-analysis
This investigation aimed to assess the discrete and synergic impacts of SiC whiskers (SiC w)
and nano-sized WC (WC n) on the microstructure of TiC-based materials. Three dense …
and nano-sized WC (WC n) on the microstructure of TiC-based materials. Three dense …
Study of the effect of ultrasonic vibration on nickel-based coating by electrical discharge machining
Surface modification of ASTM 1045 carbon steel using ultrasonic vibration-assisted
automatic electric discharge machining (UAEDM) in gaseous media was carried out, aiming …
automatic electric discharge machining (UAEDM) in gaseous media was carried out, aiming …