In this paper, the relationship between anisotropic mechanical properties and the
corresponding microstructure evolution of wrought magnesium alloys is critically reviewed …

This review highlights the recent advancements in Mg research in South Korea with a prime
focus on high-speed-extrudable Mg–Bi-based alloys for high productivity and strength …

The active twin variants during {10–12} twinning of magnesium alloys were dependent on
the strain path (ie, compression perpendicular to the c-axis or tension parallel to the c-axis) …

Hot compression tests of Mg-Gd-Y-Zr alloy at different deformation temperatures and strains
were carried out with Gleeble-1500 simulator at strain rate of 0.002 s− 1. The microstructure …

Nucleation and propagation of tensile twins in magnesium alloy AZ31 are investigated for a
large number of twins at an early stage of their development. High-resolution electron …

Abstract Binary Mg-1 wt.% Gd and Mg-1 wt.% Ce wrought alloys, with basal type starting
texture, are subjected to plane strain compression. Specially oriented specimens invoking c …

We present a single crystal plasticity model for pure Mg incorporating slip and deformation
twinning. The model uses the basic framework of Kalidindi (1998), but proposes constitutive …

A pre-cold-deformation process was applied for commercially pure titanium at cryogenic
temperature to activate high-density deformation twins, and subsequent hot-deformation …

Mg alloys generally suffer from their poor formability at low temperatures due to their strong
basal texture and a lack of adequate deformation systems. In the present study, a small …

The Schmid factors for four slip systems (basal〈 a〉, prismatic〈 a〉, pyramidal〈 a〉 and〈 c+
a〉 slips) and two twinning patterns ({101¯ 2} and {101¯ 1} twins) were systematically …