Titanium alloys have been considered as unique materials for many years. Even their
microstructure and operational properties have been well known and described in details …

In this study, laser powder bed fusion (L-PBF), also known as selective laser melting (SLM),
was used to fabricate samples of titanium-tantalum (TiTa) alloys with 0, 10, 30 and 50 wt% of …

In this article, the authors discuss the results of studies into the processing of Ti‐5Al‐5Mo‐5V‐
1Cr‐1Fe near‐β titanium alloy (Ti‐55511) by electron beam melting (EBM), an additive …

The process of martensitic α′(α ″) phase decomposition in titanium alloys has not been
sufficiently characterised in the literature–especially in terms of plastically deformed …

Sažetak The surface layers obtained on selected titanium alloys, used in medicine, by the
nitriding under glow discharge condition were investigated. The results concern of: α …

Titanium alloy WT3-1 with an σ+ β structure was subjected to isothermal plasma nitriding at
730, 830 and 1030° C, and cyclic plasma nitriding between 930 and 730° C. The wear …

The article presents the results of the microstructure and selected mechanical properties of
the medical titanium alloy Ti13Nb13Zr. These results were obtained through heat treatment …

Purpose: The paper reports characteristic of superplasticity phenomenon in titanium alloys
and possibility of its applications. Design/methodology/approach: The main objective of the …

Martensite, α ', commonly appears in Ti-6Al-4V upon rapid cooling from above the β-transus
temperature. It is known that α 'decomposes into α and β at high temperatures but well below …

Recent surface treatment studies show that titanium alloys should have an improved
resistance to frictional wear and fatigue strength limit without any loss of their high corrosion …