In the present research work, the 2.25 Cr1Mo0. 25V steel plates with a thickness of 112 mm
were welded using the multi-pass submerged automatic arc welding process. The creep …

The effect of Q-Al 5 Cu 2 Mg 8 Si 6 phase on creep and tensile properties of Al-Si-Cu-Mg
alloy at elevated temperatures was investigated. Microstructure observation clarifies that the …

Creep damage of austenitic stainless steels was evaluated by Electron Back-Scattered
Diffraction (EBSD) analysis of creep deformation induced grain lattice distortion in this …

The creep and fracture characteristics of a Ni‐based superalloy with preprecipitated δ
phases are researched at the intermediate temperatures (630–670° C). The influences of …

The formability of dual-phase steels strongly depends on void nucleation and growth
resulting from strain heterogeneities at the microscale between soft ferrite and hard …

Cast irons are a family of ferrous alloys with carbon content ranging from 2.5 to 5%. They
have a wide range of applications in automotive, industrial, agriculture, and construction …

Ductile Ni-resist cast iron (type D-5S) which is normally used in exhaust manifold in
automotive industries mainly contains up to 29 wt% nickel, 4.9 wt% silicon and 1.7 wt …

There exists a challenge in predicting the long-term creep of materials (3 105 hours) where
11+ years of continuous testing is required to physically collect creep data. As an alternative …

Tensile and compression tests were carried out on a ductile cast iron for temperatures up to
1073 K. The damage caused inside and around graphite nodules was evaluated as a …

Compression tests were carried out on ductile cast iron with different sample geometries in
order to understand the influence of the stress triaxiality on the local strain. The tests were …