Iron-based superalloys are alloys produced for use in corrosive environments as an
alternative to high-cost nickel-based superalloys. However, their average strength and …

This study explores the transformative potential of boriding to enhance the tribocorrosion
resistance of mooring chain steel for offshore environments. The boride layers formed at …

Boride layer characterization and dry sliding wear behaviors of borided H13 steel at different
durations and temperatures with nanoboron powder have been investigated. A single phase …

A boriding treatment was applied to AISI 1020 steel at 1000° C for 4 h. The samples were
characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and the …

In this study, sintering and boriding methods are applied as a single step, and it is aimed to
gain time and economic advantage. For this purpose, powder mixtures prepared in suitable …

Boronizing processes were carried out at 900° C, 950° C and 1000° C for 2, 4 and 6 h to
improve the wear performance of Monel 400 alloy. According to microstructure analyses and …

New data for micro-abrasion wear resistance of CoB/Co 2 B coating was obtained through a
ball cratering test. The coating was formed on the surface of a CoCrMo alloy using the …

There is an increasing concern over simultaneous wear and corrosion (tribocorrosion)
issues that cause the material failure of stainless steel in marine environments. The main …

In this study, the metallographic structure and wear behaviour of boron-coated rail steels
were investigated. For this purpose, the wear behaviour of boronized rail steels was …

Boriding treatment was applied to AISI 1020 steel to improve its wear resistance. The
samples were characterized by X-ray diffraction (XRD), scanning electron microscopy …