The application of additively manufactured (AM) stainless steel (SS) parts is rapidly
emerging in a broad spectrum of industries. Laser powder bed fusion (LPBF) and direct …

Pitting is a common type of localized corrosion in passive alloys that can cause rapid failure
of material or equipment. In the case of stainless steels, non-metallic inclusions have been …

In this work the initial stages of the pitting corrosion in Q460NH weathering steel in a marine
environment was studied. To elucidate the effects of inclusions modified by rare earth (RE) …

The influence of Al 2 O 3 inclusions on the localized corrosion behaviour of Q460NH steel
was investigated in a simulated marine environment. According to the current sensing …

In this study, the pitting corrosion behavior of 13Cr4Ni martensitic stainless steel (BASE) and
that modified with rare earth (REM) in 0.1 mol/L NaCl solution were characterized …

Electroanalytical chemists and others are concerned not only with the application of new
and classical techniques to analytical problems, but also with the fundamental theoretical …

Recently, additive manufacturing has got tremendous attention due to ease in the production
of complex metallic parts for different applications ie aerospace, petrochemical etc …

The mechanism of oxide inclusion-induced pitting corrosion in 316L stainless steel exposed
to sulphur environments containing chloride ions was investigated by scanning electron …

The near-surface ion distribution at the solid–liquid interface during the Hydrogen Oxidation
Reaction (HOR)/Hydrogen Evolution Reaction (HER) on a rotating platinum disc electrode is …

The present work investigated the localized corrosion of 304 stainless steel triggered by
MnS in 3.5 wt% NaCl solution via multi-analytical approaches including in-situ and ex-situ …