Improvement of microstructure, tribology and corrosion characteristics of nickel-aluminum bronze by P/M method
In the present study, we have produced CuAl10Ni5Fe4 alloy powders by using the planar
flow casting method. The microstructure, wear response, and corrosion properties of as-cast …
flow casting method. The microstructure, wear response, and corrosion properties of as-cast …
Effect of alloying time and heat treatment on microstructure and tribological properties of mechanical alloyed Cu-Al-Ni shape memory alloy
In this study, the effects of milling time and heat treatment on microstructure and wear
behavior of Cu-Al-Ni shape memory alloys produced by the mechanical alloying method …
behavior of Cu-Al-Ni shape memory alloys produced by the mechanical alloying method …
FEM and machine learning aided modelling of compressive deformation anisotropy in pressure-less sintered Cu-15Ni-8Sn alloy
T Kamal, A Upadhyaya - Materialia, 2024 - Elsevier
Pressure-less sintering integrated forging is an effective method for densification
enhancement of powder metallurgy (PM) processed Cu-15Ni-8Sn alloy. Nevertheless …
enhancement of powder metallurgy (PM) processed Cu-15Ni-8Sn alloy. Nevertheless …
Effect of niobium addition on the microstructure and wear properties of mechanical alloyed Cu–Al–Ni shape memory alloy
In this study, the influence of the addition of Nb in varying amounts (0.5, 1, 1.5, and 2 wt.%)
to Cu–14Al–4Ni shape memory alloy on the microstructure and wear behavior of the alloy …
to Cu–14Al–4Ni shape memory alloy on the microstructure and wear behavior of the alloy …
Effect of Cu content on the microstructure and properties of sintered Fe-0.8 C-xCu antifriction materials
J Li, H Feng, J Zhang, P Chen… - Materials Research …, 2024 - iopscience.iop.org
Ferrous antifriction materials (FAMs) play a crucial role in powder metallurgy. Previous
studies have primarily focused on exploring the antifriction properties of Fe-C-Cu materials …
studies have primarily focused on exploring the antifriction properties of Fe-C-Cu materials …
The effects of different heat treatment regimes on the wear properties of Fe-based composite materials
In this study, different heat treatment regimes, such as sintering, sintering with low-pressure
cementation, and only low-pressure cementation were applied to pure Fe and 0.2 and 0.4 …
cementation, and only low-pressure cementation were applied to pure Fe and 0.2 and 0.4 …
Experimental optimization of tribological properties of aluminum bronze alloys made by the forging method
Aluminum bronze alloys produced by various methods are preferred materials in many fields
of the industry due to their high wear resistance and good sliding properties. This study …
of the industry due to their high wear resistance and good sliding properties. This study …
Analysis of dry wear, microstructure and thermodynamic parameters of CuAlTa bulk material
E Ercan - Transactions of the Indian Institute of Metals, 2021 - Springer
The microstructural properties and thermodynamic parameters before and after abrasion
were examined for a bulk Cu86Al10Ta4 (% wt.) shape memory alloy produced by the arc …
were examined for a bulk Cu86Al10Ta4 (% wt.) shape memory alloy produced by the arc …
Correlation between Microstructure and Erosion-Corrosion Behavior of a Nickel-Aluminum Bronze Produced by Continuous Casting and Powder Metallurgy
Abstract In this study, Powder Metallurgy (PM) was used to produce Nickel-Aluminum
Bronze (NAB) alloys for naval application. The effect of an annealing treatment on the …
Bronze (NAB) alloys for naval application. The effect of an annealing treatment on the …
[PDF][PDF] Effects of high temperature applied to CuAlTa alloy in air atmosphere on thermodynamic parameters and microstructure
E Ercan, F Dağdelen - Journal of the Faculty of Engineering and …, 2022 - academia.edu
Effects of high temperature applied to CuAlTa alloy in air atmosphere on thermodynamic
parameters and microstructure Page 1 Journal of the Faculty of Engineering and …
parameters and microstructure Page 1 Journal of the Faculty of Engineering and …