The amalgamated effect of hot-rolling, rapid cooling and heat treatment on the grain
refinement and the resultant mechanical properties of an intermetallic sheet of nominal …

Two titanium aluminide (TiAl) based compositions with different niobium (Nb) contents,
namely Ti–45Al–5Nb-0.2 B-0.2 C and Ti–45Al–10Nb-0.2 B-0.2 C, have been investigated …

The deformation mechanisms associated with uniaxial tensile testing are studied by
conducting tensile experiments of an FeCrAl alloy using scanning electron microscopy …

The effect of different solutionizing temperature and cooling rate on the extent of recovery,
recrystallization and texture evolution in the alloy Ti‐6Al‐4V (Ti-64) has been investigated in …

The deformation mechanisms of neutron-irradiated 304 L stainless steel have been
investigated using the in-situ electron backscattered diffraction (EBSD) technique. To …

The mechanical behavior of a cast CuMnNiFeCo high entropy alloy, with larger grains and
0.5%(by volume) of micro-porosities, was investigated at room temperature under a …

Hot deformation and softening response for the titanium aluminide Ti–48Al–2V–0.2 B has
been investigated. The deformation response to softening mechanisms has been examined …

Third generation γ-titanium aluminides with nominal compositions Ti–45Al–5Nb–0.2 B–0.2
C and Ti–45Al–10Nb–0.2 B–0.2 C were investigated to identify the phase transformation …

The formation of shear bands during hot deformation of a two-phase (α2+ γ) titanium
aluminide and its consequences on dynamics softening has been investigated. The starting …

The hot compression tests of Ti–47.5 Al–2.5 V–1.0 Cr–0.2 Zr alloy were achieved by a
Gleeble thermal simulator. The results show that the residual lamellar microstructure has …