With the development of 3D printing technology, there is a need to produce printable
materials with improved properties, eg, sliding properties. In this paper, the authors present …

In this study, two oriented flaky fillers in plasticized polyvinyl chloride (P‐PVC) matrix were
respectively compared on some rheological behaviors such as dynamic rheological …

Multi-wall carbon nanotubes (MWCNTs), graphene nanoplates (GNPs), and hybrid fillers
(MWCNTs/GNPs) filled thermoplastic polyurethane (TPU) nanocomposites are prepared via …

Abstract Acrylonitrile-butadiene-styrene (ABS) terpolymer was loaded with expandable
graphite (EG) at four different concentrations of 5%, 10%, 15% and 20% using micro …

In this study, organoclay-containing polystyrene (PS)-based nanocomposites were
fabricated by extrusion in the presence of thermoplastic elastomer modifiers. Styrene …

High-density polyethylene (HDPE)/carbon filler composites for potential applications in food
tray packaging were prepared by melt compounding HDPE with one-dimensional (1D) …

The melt viscosity of triblock copolymer styrene‐isoprene‐styrene (SIS) filling systems
decreased in some sense by adding 0.1 wt% fillers. The types of fillers included both nano …

Multiscale hybrid composites were prepared using varying weight percentages (0 to 5) of
multiwalled carbon nanotubes (MWCNTs) as nanofiller and a fixed weight percentage (20) …

An analytical/numerical method is revisited and proposed for process material specific
design of coat-hanger dies. For this aim, both representative viscosity approach (RVA) and …

L'objectif principal de ce travail est d'étudier les propriétés d'un composite polymère-métal
d'un point de vue physique, thermique, mécanique et électrique large bande. Pour cela, des …