[HTML][HTML] Flexibility options in a decarbonising iron and steel industry

A Boldrini, D Koolen, W Crijns-Graus, E Worrell… - … and Sustainable Energy …, 2024 - Elsevier
The decarbonisation of the iron and steel industry is expected to significantly increase its
electricity consumption due to higher levels of electrification and the partial shift to hydrogen …

Recent advances in elevated-temperature pressure swing adsorption for carbon capture and hydrogen production

X Zhu, S Li, Y Shi, N Cai - Progress in Energy and Combustion Science, 2019 - Elsevier
In this work, advanced technologies concerning warm gas carbon capture and hydrogen
production from carbon-based fuels are reviewed, with a primary focus on the elevated …

[HTML][HTML] Perspective on the hydrogen economy as a pathway to reach net-zero CO 2 emissions in Europe

M van der Spek, C Banet, C Bauer… - Energy & …, 2022 - pubs.rsc.org
The envisioned role of hydrogen in the energy transition–or the concept of a hydrogen
economy–has varied through the years. In the past hydrogen was mainly considered a clean …

Assessment of low-carbon iron and steel production with CO2 recycling and utilization technologies: a case study in China

Q Chen, Y Gu, Z Tang, W Wei, Y Sun - Applied Energy, 2018 - Elsevier
Substance flow analysis (SFA) and energy and economic assessment were used in this
study to analyze the utilization of CO 2 in the steelmaking system based on four scenarios …

[HTML][HTML] Thermal efficiency gains enabled by using CO2 mixtures in supercritical power cycles

F Crespi, PR De Arriba, D Sánchez, A Ayub… - Energy, 2022 - Elsevier
The present paper explores the utilisation of dopants to increase the critical temperature of
Carbon Dioxide (sCO 2) as a solution towards maintaining the high thermal efficiencies of …

[HTML][HTML] A comprehensive review of carbon capture science and technologies

C Wu, Q Huang, Z Xu, AT Sipra, N Gao… - Carbon Capture Science …, 2024 - Elsevier
CO 2 is one of the major anthropogenic greenhouse gases in the atmosphere contributing to
global warming (Blamey et al., 2010; Mikkelsen et al., 2010). In the last half-century, the …

[HTML][HTML] Adoption of the CO2+ SO2 mixture as working fluid for transcritical cycles: A thermodynamic assessment with optimized equation of state

E Morosini, A Ayub, G di Marcoberardino… - Energy Conversion and …, 2022 - Elsevier
This paper focuses on the use of the CO 2+ SO 2 binary mixture as innovative working fluid
for closed transcritical power cycles with a minimum temperature above 50° C. Starting from …

[HTML][HTML] Integration of carbon capture technologies in blast furnace based steel making: A comprehensive and systematic review

J Perpiñán, B Peña, M Bailera, V Eveloy, P Kannan… - Fuel, 2023 - Elsevier
Decarbonization of the iron and steel industry, which accounts for 7–9% of global annual
emissions, is a strategic objective to achieve carbon emissions reduction targets in line with …

Carbon capture and storage from energy and industrial emission sources: a Europe-wide supply chain optimisation

F d'Amore, MC Romano, F Bezzo - Journal of Cleaner Production, 2021 - Elsevier
Power, steel, cement and refining sectors are currently responsible for the largest shares of
carbon dioxide emissions from stationary sources. Carbon capture and storage is …

[HTML][HTML] Techno-economic assessment of blast furnace gas pre-combustion decarbonisation integrated with the power generation

N Khallaghi, SZ Abbas, G Manzolini… - Energy Conversion and …, 2022 - Elsevier
Aiming at the iron and steel industry decarbonisation with blast furnace gas (BFG) utilisation,
a techno-economic feasibility of the pre-combustion carbon capture with methyl …