A review of thermomechanical properties of lightweight concrete

G Samson, A Phelipot-Mardelé… - Magazine of Concrete …, 2017 - icevirtuallibrary.com
During the last 30 years, lightweight concretes (LCs) have been developed in order to
decrease the volume of load-bearing components, reduce the consumption of raw materials …

Mechanical properties of glass fiber reinforced ceramic concrete

ST Tassew, AS Lubell - Construction and Building Materials, 2014 - Elsevier
This paper reports on tests conducted to establish the influence of chopped glass fibers on
the mechanical and rheological properties of ceramic concrete produced using a phosphate …

Review on the mixture design and mechanical properties of the lightweight concrete containing expanded polystyrene beads

B Vakhshouri, S Nejadi - Australian Journal of Structural …, 2018 - Taylor & Francis
Lightweight concrete containing expanded polystyrene beads (EPS-LWC) is frequently used
in different structural and non-structural applications, since it was first developed about 60 …

[HTML][HTML] Effect of Mix design parameters on the properties of cementitious composites incorporating volcanic ash and dune sand

J Bawab, H El-Hassan, A El-Dieb, J Khatib - Developments in the Built …, 2023 - Elsevier
This study examines the properties of cementitious composites incorporating volcanic ash
(VA) and dune sand. The effect of five mix design parameters was studied using the Taguchi …

Mechanical properties of basalt fiber reinforced ambient-cured lightweight expanded polystyrene geopolymer concrete

J Wei, Q Yang, Q Jiang, X Li, S Liu, K Li… - Journal of Building …, 2023 - Elsevier
This study investigated the mechanical properties of ambient-cured lightweight expanded
polystyrene (EPS) geopolymer concrete (LEGC) specimens with densities ranging from …

A novel method for the stabilization of soluble contaminants in electrolytic manganese residue: using low-cost phosphogypsum leachate and magnesia/calcium oxide

H Chen, Q Long, Y Zhang, S Wang, F Deng - … and Environmental Safety, 2020 - Elsevier
Electrolytic manganese residue (EMR) contains a large amount of NH 4+-N and Mn 2+ and
can negatively impact the environment. A stabilization treatment of soluble contaminants in …

Experimental study on the dynamic behaviour of expanded-shale lightweight concrete at high strain rate

Y Du, H Qi, J Jiang, JYR Liew - Materials and Structures, 2022 - Springer
Expanded-shale lightweight concrete (ESLWC) has promising application in large-span
bridges, high-rise buildings and offshore structures, owing to its advantages of conserving …

Stabilization/solidification of mercury-contaminated waste ash using calcium sodium phosphate (CNP) and magnesium potassium phosphate (MKP) processes

JH Cho, Y Eom, TG Lee - Journal of hazardous materials, 2014 - Elsevier
This study examined the stabilization and solidification (S/S) of mercury (Hg)-contaminated
waste ash generated from an industrial waste incinerator using chemically bonded …

[PDF][PDF] Phosphate cement-based concretes containing silica fume

LT Hong, AS Lubell - ACI Materials Journal, 2015 - researchgate.net
Phosphate-based cements have been proposed as alternative binders to ordinary portland
cements in concretes and mortars. This study investigated the rheological and mechanical …

Thermal analysis of high‐performance mortar containing burnt clay shale as a partial Portland cement replacement in the temperature range up to 1000 C

A Trník, L Scheinherrová, T Kulovaná… - Fire and …, 2017 - Wiley Online Library
Clay shale is a specific type of material that contains a large amount of kaolinite. Burnt clay
shale belongs to a large group of pozzolans, and its pozzolanic properties are activated after …