A review of hydrogen and natural gas addition in diesel HCCI engines
AA Hairuddin, T Yusaf, AP Wandel - Renewable and Sustainable Energy …, 2014 - Elsevier
Homogeneous charge compression ignition (HCCI) engine uses a relatively new mode of
combustion technology. In principle, there is no spark plug or injector to assist the …
combustion technology. In principle, there is no spark plug or injector to assist the …
[HTML][HTML] Turbulent combustion modeling for internal combustion engine CFD: A review
The modeling of combustion or, to be exact, turbulent combustion using numerical
simulation has become state-of-the-art in the process of developing internal combustion …
simulation has become state-of-the-art in the process of developing internal combustion …
Laminar flame speeds and ignition delay times of methane–air mixtures at elevated temperatures and pressures
Measurements on laminar flame speeds and ignition delay times of methane/air mixtures at
elevated pressures and temperatures were carried out in a constant volume bomb and …
elevated pressures and temperatures were carried out in a constant volume bomb and …
Comprehensive experimental and simulation study of the ignition delay time characteristics of binary blended methane, ethane, and ethylene over a wide range of …
A comprehensive experimental and kinetic modeling study of the ignition delay time (IDT)
characteristics of some binary blends of C1–C2 gaseous hydrocarbons such as …
characteristics of some binary blends of C1–C2 gaseous hydrocarbons such as …
Oxidation of C1− C5 alkane quinternary natural gas mixtures at high pressures
D Healy, DM Kalitan, CJ Aul, EL Petersen… - Energy & …, 2010 - ACS Publications
Rapid compression machine (RCM) and shock-tube facilities have been employed to study
the oxidation of natural gas blends at high pressure and intermediate to high temperatures …
the oxidation of natural gas blends at high pressure and intermediate to high temperatures …
[HTML][HTML] An experimental and kinetic modeling study of the auto-ignition of natural gas blends containing C1–C7 alkanes
Ignition delay time measurements for multi-component natural gas mixtures were carried out
using a rapid compression machine at conditions relevant to gas turbine operation, at …
using a rapid compression machine at conditions relevant to gas turbine operation, at …
Methane/propane oxidation at high pressures: Experimental and detailed chemical kinetic modeling
EL Petersen, DM Kalitan, S Simmons… - Proceedings of the …, 2007 - Elsevier
Shock tube experiments and chemical kinetic modeling were performed to further
understand the ignition and oxidation kinetics of various methane–propane fuel blends at …
understand the ignition and oxidation kinetics of various methane–propane fuel blends at …
A Comprehensive Experimental and Simulation Study of Ignition Delay Time Characteristics of Single Fuel C1–C2 Hydrocarbons over a Wide Range of …
A comprehensive experimental and modeling study of the ignition delay time (IDT)
characteristics of some single prominent C1–C2 hydrocarbons including methane, ethane …
characteristics of some single prominent C1–C2 hydrocarbons including methane, ethane …
Dissociation characteristics and anthropogenic emissions from the combustion of double gas hydrates
DV Antonov, IG Donskoy, OS Gaidukova… - Environmental …, 2022 - Elsevier
Gas hydrates are an alternative and environmentally friendly energy source increasingly in
the focus of scientific attention. The physicochemical processes behind gas hydrate …
the focus of scientific attention. The physicochemical processes behind gas hydrate …
Ignition and kinetic modeling of methane and ethane fuel blends with oxygen: A design of experiments approach
A series of shock-tube experiments and chemical kinetics modeling calculations were
performed to investigate the ignition behavior of methane and ethane with oxygen in regions …
performed to investigate the ignition behavior of methane and ethane with oxygen in regions …