Polymer-derived ceramics (PDCs) have been intensively studied for nearly 50 years due to
their unique advantages to producing ceramic fibers, coatings, foams, nanocomposites and …

Tape casting is a well-established technique to fabricate ceramic tapes. This technique has
been usually applied to produce dense substrates for electronic applications, but recently …

CuBi2O4 is a multinary p-type semiconductor that has recently been identified as a
promising photocathode material for photoelectrochemical (PEC) water splitting. It has an …

Objectives Our goal is to review design strategies for the fabrication of calcium phosphate
ceramic scaffolds (CPS), in light of their transient role in bone tissue engineering and …

Macroporous ceramics with pore sizes from 400 nm to 4 mm and porosity within the range
20%–97% have been produced for a number of well‐established and emerging …

Porous ceramics, in particular cellular ceramics with open and closed porosity, are key
enabling components in different demanding applications because of their favorable set of …

Cellular ceramics are a class of highly porous materials that covers a wide range of
structures, such as foams, honeycombs, interconnected rods, interconnected fibres …

This review presents the synthesis, characterization techniques, processing and potential
applications of silicon-based ceramic materials derived from organosilicon polymers. The Si …

By employing carefully controlled processing methods, a large amount of porosity (>
70vol%) was introduced in ceramic materials derived from preceramic polymers (silicone …

Because of the unique combination of their attractive properties, porous ceramics are
considered as candidate materials for several engineering applications. The production of …