This review covers the basics of, inorganic-polymer composite electrolyte materials that
combine inorganic components with polymer matrices to enhance the ionic conductivity and …

Alkali metal nitrates were successfully used as starting chemicals in the production of
composite CO 2 separation membranes. The easy conversion of nitrates into carbonates …

Cermet compositions based on Nickel–Copper alloys with gadolinium doped ceria as the
ceramic matrix, Ni 1-x Cu x O (x= 0, 0.4 and 0.8 mol%) with 50 wt% CGO (Ce 0.9 Gd 0.1 O …

Composite membranes for CO 2 separation based on CGO (Gd-doped ceria) and the
eutectic mixture of Na and Li carbonates, with distinct salt content (around 20 and 40 vol%) …

The electrical performance and CO 2 permeation of composite membranes based on Gd-
doped ceria skeletons impregnated with molten alkaline carbonates are benchmarked …

Although ceramic nanocomposite fuel cells (CNFCs) have attracted the attention of the fuel
cell community due to their low operating temperature (< 600° C), often the performance of …

Abstract Ce 0.5 Yb 0.5 O 1.75 was prepared for the first time through high temperature
(1600° C for 5 h) solid state reaction, after high energy milling to enhance the mechano …

A multi-oxide material LiNiCuZn-oxide was prepared through a slurry method as an anode
for ceramic nanocomposite fuel cell (CNFC). The CNFCs using this anode material, LSCF as …

Composite electrolytes including an oxide (Gd‐doped ceria, 70, 80, and 90 vol%) and a
eutectic mixture of alkaline carbonates (Na2CO3 and Li2CO3) were produced by joint …

Several composite materials were produced using ceria nanoparticles (< 25 nm) and LiAlO
2 (particle size> 1 μm). The oxides were combined with a mixture of Na 2 CO 3 and Li 2 CO …