Recently a demand-driven development of iron-based coatings that could be an alternative
for self-fluxing and cermet coatings for the protection of screen tubes of boilers of power …

Wire arc spraying is an economically attractive thermal spray process that is especially
interesting for the protection of large-scale parts or constructions. This study presents the …

The mechanical properties (hardness, cohesion, and residual stresses) of arc coatings
designed for operation under conditions of boundary friction and corrosive-abrasive wear …

The melting conditions of the electrode wires and the structure of coatings, obtained by the
electric arc spraying method depending on the pressure of the spraying air flow, are …

We study the microstructure of deposited coatings formed by a composite material based on
PG-10N-01 self-fluxing alloy and modified with a mechanically activated composite material …

Mechanical properties, chemical microheterogeneity, and corrosion resistance in a 3%
aqueous NaCl solution of arc coatings sprayed with cored wires (CW) with different charge …

To obtain wear-resistant coatings, the cored wires (CW) with a diameter of 1.6... 1.8 mm as
electrode materials are mainly used. Using the large-diameter CW enable significantly …

The influence of the modes of anhydrous nitriding of 08Kh18N10 steel on its phase
composition, distribution of the main alloying elements, and the content of nitrogen in the …

Электродуговая металлизация находит все более широкое применение для получения
восстановительных и защитных покрытий различного функционального назначения …

We study the serviceability of coatings of the Fe–Cr–Mn–Ti–Al system sprayed from powder
wires depending on their absorption capacity. We also establish the mechanism of wear of …