[HTML][HTML] Grain refinement and morphological control of intermetallic compounds: A comprehensive review
Intermetallic compounds (IMCs) are ordered solid-state compounds formed from chemical
reactions between two or more metals exhibiting distinctive crystal arrangements and …
reactions between two or more metals exhibiting distinctive crystal arrangements and …
Mechanical Properties and Microstructures of Highly Fe-Containing Al–Mg–Si Alloys Processed by Severe Plastic Deformation under High Pressure
In this study, A6022-based Al–Mg–Si alloys with three additional Fe contents are processed
by high-pressure torsion (HPT) and high-pressure sliding (HPS). Both processes yield a …
by high-pressure torsion (HPT) and high-pressure sliding (HPS). Both processes yield a …
Atomic structure of GPB-II zone and its evolution in an Al-Zn-Mg-Cu-Si crossover alloy during aging
K Guo, S Liang, S Wen, W Wei, X Wu, K Gao… - Materials …, 2024 - Elsevier
The GPB-II zone is the main strengthening precipitate in the Al-4.5 Zn-1.5 Mg-1.0 Cu-0.35 Si
(wt.%) crossover alloy, resulting in increased alloy strength and ductility. The atomic …
(wt.%) crossover alloy, resulting in increased alloy strength and ductility. The atomic …
The effects of cooling rate on microstructure formation during solidification of 319 alloy
This work assesses the effect of cooling rate (T˙) on the solidification kinetics and
microstructural evolution of a 319 aluminum alloy with and without the addition of Al–5 wt …
microstructural evolution of a 319 aluminum alloy with and without the addition of Al–5 wt …
Local elongation of a high Fe-containing Al-Si-Cu-Mg alloy by a deformation-semisolid extrusion process
DH Kim, JH Kim, JY Jeon, YW Kim, E Kobayashi - Materials Letters, 2022 - Elsevier
Abstract Local elongation of Al-4.5 Si-1.0 Cu-0.3 Mg (-1.0 Fe) alloys (wt.%) produced by a
deformation-semisolid extrusion process is investigated using an optical microscope, tensile …
deformation-semisolid extrusion process is investigated using an optical microscope, tensile …
Excellent double-aging strengthening effect with the high density γ'phase of 945A nickel-based alloy
H Liu, D Wang, L Zhou, J She, P Peng, Q He, W Wu - Crystals, 2022 - mdpi.com
The double-aging strengthening effect of the γ'phase in 945A nickel-based alloy was
investigated. The double-aging treatment significantly improved the compressive yield …
investigated. The double-aging treatment significantly improved the compressive yield …
[HTML][HTML] 固溶时间对半固态挤压成形Al-17Si-4Cu-0.5 Mg 合金组织及力学性能的影响
郝建飞， 于宝义， 罗惠馨， 史原脊， 李润霞 - 材料工程, 2021 - html.rhhz.net
采用半固态挤压成形工艺制备过共晶Al-17Si-4Cu-0.5 Mg 合金, 研究固溶时间对过共晶Al-17Si-
4Cu-0.5 Mg 合金组织及性能的影响. 结果表明, 随着固溶时间的增加, Si 相出现球化 …
4Cu-0.5 Mg 合金组织及性能的影响. 结果表明, 随着固溶时间的增加, Si 相出现球化 …