[HTML][HTML] Recent Developments in Friction Stir Welding Tools for Weld Bead Defects Minimization–A Review
Friction stir welding (FSW) is considered one of the most prominent methods for joining
ductile materials. In this process, joining occurs in a plastic state without melting the base …
ductile materials. In this process, joining occurs in a plastic state without melting the base …
A comparative study on friction stir welding of tailor weld blanks
The effect of single-pass (SP) and double-pass (DP) friction stir welding (FSW) on
metallographic and mechanical properties of joints was investigated in this study. Uniform …
metallographic and mechanical properties of joints was investigated in this study. Uniform …
Effect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steel
LA Bergmann, BF Batistão, NG de Alcântara… - Welding in the …, 2022 - Springer
The effect of tool rotational speed and double-sided welding in friction stir welding of
aluminum alloy AA5083 and GL A36 steel was investigated. Defect-free joints were obtained …
aluminum alloy AA5083 and GL A36 steel was investigated. Defect-free joints were obtained …
Al alloy tailor welded blank fabrication by friction stir welding: effect of double-pass
Friction stir welding (FSW) in butt joint configuration between 6.35 mm thick plates of
AA2024-T3 and 2.5 mm thick plates of AA7475-T7 dissimilar alloys is addressed using T4 …
AA2024-T3 and 2.5 mm thick plates of AA7475-T7 dissimilar alloys is addressed using T4 …
Investigation of single-pass/double-pass techniques on friction stir welding of aluminium
The aim of this research is to study the effects of single-pass/double-pass techniques on
friction stir welding of aluminium. Two pieces of AA1100 with a thickness of 6.0 mm were …
friction stir welding of aluminium. Two pieces of AA1100 with a thickness of 6.0 mm were …
Residual stress, microstructure and mechanical properties in thick 6005A-T6 aluminium alloy friction stir welds
Plates (37 mm thick) of 6005A-T6 aluminum alloy were butt joined by a single-sided and
double-sided friction stir welding (FSW). The 3D residual stresses in the joints were …
double-sided friction stir welding (FSW). The 3D residual stresses in the joints were …
Investigation on the Process Parameters of Double-Sided Friction Stir Welded AA6082-T6 Joints with Different Tool Pins Using Response Surface Methodology
Aluminium alloys are of much use in several vital areas including aerospace, marine,
defence and railways, which becomes obligatory to have a welded joint of high strength. The …
defence and railways, which becomes obligatory to have a welded joint of high strength. The …
Comparison of the optimized process parameters of double-sided friction stir welded aluminium alloy joints using statistical and evolutionary techniques
S Vignesh, P Dinesh Babu… - Applied Mechanics …, 2016 - Trans Tech Publ
One of the most innovative solid state welding techniques used in the aerospace,
automotive, defence, rail and marine industries is Friction Stir Welding (FSW) process, as it …
automotive, defence, rail and marine industries is Friction Stir Welding (FSW) process, as it …
Multi response optimisation of FSW while using dissimilar aluminium alloys
In recent times, focus has been on developing fast and efficient processes that are
environment friendly. The spotlight has been turned on'friction stir welding'as a joining …
environment friendly. The spotlight has been turned on'friction stir welding'as a joining …
[PDF][PDF] Effect of Different Tool Geometries in Friction Stir Welding of AA 2024-T3 using Design of Experiments
MH Al-Saadi, SK Hussein, ML Saad - Al-Nahrain Journal for Engineering …, 2017 - iasj.net
In this work, Aluminum alloy (AA2024-T3) was welded by friction stir (FSW) method using
different pin profile design types; straight cylinder, threaded cylinder, tapered cylinder …
different pin profile design types; straight cylinder, threaded cylinder, tapered cylinder …