In the current investigation, additive friction stir-deposition (AFS-D) of as-cast hypoeutectic
A356 Al alloy was conducted. The effect of feeding speeds of 3, 4, and 5 mm/min at a …

In the current work, mild steel used in shipbuilding applications was friction-stir-welded
(FSWed) with the aim of investigating the microstructure and mechanical properties of the …

NiCrBSi, WC-12Co and NiCrBSi with 30, 40 and 50 wt.% WC-12Co coatings were produced
on low carbon steel by laser cladding with an Nd: YAG laser with a multi-jet coaxial cladding …

This work investigates the feasibility of using friction stir welding (FSW) process as a groove
filling welding technique to weld duplex stainless steel (DSS) that is extensively used by …

In this work, three mathematical models for the heat generation during bobbin tool friction stir
welding (BT-FSW) of aluminum using three tool pin geometries have been proposed. The …

Friction stir spot welding (FSSW) is one of the important variants of the friction stir welding
(FSW) process. FSSW has been developed mainly for automotive applications where the …

1Cr11Ni2W2MoV is a new martensitic heat-resistant stainless steel utilized in the
manufacturing of aero-engine high-temperature bearing components. Welding of this type of …

This study investigated the effect of the friction stir welding rotation rate and welding speed
on the quality and properties of the dissimilar joints between aluminum and carbon steel …

This study investigates the effect of tool rotation speed on the microstructure evolution of the
friction stir welded 1Cr11Ni2W2MoV martensitic stainless steel. The microstructure changes …

This study investigates the microstructural and mechanical properties of WC-FeCr base alloy
composite materials prepared using spark plasma sintering (SPS) technique. The …