The paper presents a comprehensive review on dissimilar friction stir welding (FSW) of Al to
non-Al metallic materials, wherein the combination of Al–Mg, Al–Cu, Al-steel and Al–Ti are …

Friction stir welding (FSW) is a process by which a joint can be made in a solid state. The
complexity of the process due to metallurgical phenomena necessitates the use of models …

Due to remarkable difference in material properties of Tailor Welded Blanks (TWBs), when
subjected to uniform forming load, severe non-uniform metal flow and strain localization …

Friction stir welding of dissimilar thickness aluminum and copper alloys was carried out
without offsets by placing the copper at different positions, with horizontal and inclined bed …

This paper presents a comparative study of the mechanical properties and microstructures of
three friction stir welded joint configurations, namely square butt (SB), scarf (SC), and double …

The current study investigates the comparison of joint configuration between square butt
welding and scarf welding of aluminum 6061 and their effect on mechanical properties. Two …

In this research, an attempt is made to repair copper parts that are widely used in industry,
electrical appliances and etc. using melting method. This is very challenging and it causes …

یکی از مسائل چالش برانگیز در فرایندهای شکل‌دهی، کنترل ریزساختار می‌باشد. این امر به صورت
مستقیم با افزایش کیفیت محصول در ارتباط است. المان محدود (FEM) یکی از مناسب‌ترین روش‌ها …‎

فرآیند کشش عمیق، روشی پرکاربرد برای تولید قطعات از ورق فلزی‌ می‌باشد. هزینه اصلی قالب
در این روش ساخت ماتریس می‌باشد. استفاده از ماتریس لاستیکی سبب صرفه‌جویی در زمان ساخت و …‎

1. Introduction etals contain certain microstructure which is formed either during the process
or after that at high temperatures. Mechanical properties of the hot-formed parts depend on …