Mechanical alloying (MA) and mechanical milling (MM) techniques have been widely
utilised over the past two decades for synthesis of various alloys and composites with …

Considering commonly employed carbide particles, titanium carbide (TiC) is regarded as an
excellent reinforcement material due to its superior physical and mechanical characteristics …

This paper consists of two parts. In the first part, attrition milling of commercially available
(0.7 μm) boron carbide (B4C) particles was optimized to prepare B4C nano-particles. In the …

Aluminium metal matrix composites (AMMCs) are the fastest growing metal matrix
composites (MMCs) for the applications in several fields ie; automobile, aerospace and …

Aluminum matrix composites are emerging as advance engineering materials due to its high
specific strength and stiffness, good wear resistance and high temperature properties …

The morphological and microstructural changes during mechanical milling of Al powder
mixed with 5vol% nanoscaled alumina particles (35nm) were studied. The milling was …

Nanostructured (ie, 1–200nm grain size) and ultrafine-grained (ie, 200–500nm grain size)
metals are of interest, not only as a result of their unusual combinations of physical and …

This study focused on the characterization of a new graphene oxide (GO) reinforced Al–
10Ni/GO metal matrix composite fabricated by mechanical alloying technique. The effect of …

This work investigates the use of mechanical alloying to produce aluminium AA6061 matrix
composite powders reinforced with AlN, and the relationship among the stages of …

The combination of two versatile processing routes: cryomilling and spark plasma sintering
(SPS) was employed in the present study for fabrication of bulk Al5356-B4C …