In this study, the dissimilar TLP bonding joints of Inconel 718 nickel-base alloy and AISI
316LN stainless steel free of brittle athermal solidification zone (ASZ) were obtained. It was …

Brazing is a promising joining technique for nickel-based single-crystal superalloy (Ni-SXs)
intended for turbine blades, which endure the creep-fatigue conditions. In this work, the high …

The plate-fin heat exchanger (PFHE) is the core equipment used to achieve the high
efficiency of solid oxide fuel cell (SOFC), however, the issues of high-performance brazed …

The effects of different transient liquid phase (TLP) bonding times on the microstructure and
mechanical properties of Hastelloy X joints made by Ni–Cr–B–Si–Fe filler alloy were …

The applicability of the diffusion brazing technique for joining IN-939 superalloy using a Ni-
Cr-B interlayer was assessed. The phases formed during the brazing process in the …

Fundamental understanding of the intermetallic phase formation is the key for enhancing the
robustness and reliability of the brazed joints. The paper addresses the phase …

The microstructure of dissimilar transient liquid phase bond between Hastelloy X and IN792
nickel-based superalloys is featured by lack of sufficient formation of γ′ precipitates in the …

The paper aims at understanding solidification phenomena and solid state precipitations
during dissimilar transient liquid phase bonding of γ-TiAl intermetallic compound to IN718 Ni …

The paper aims at understanding solidification phenomena and solid state precipitations
during diffusion brazing of Hastelloy X nickel base superalloy using a ternary Ni–4.5 Si–3.2 …

Ni nanoparticles were successfully used as a melting point depressant-free filler metal to
join Inconel 718 via transient liquid phase (TLP) bonding in a vacuum environment. Ni …