Electrochemical performance and corrosion mechanism of Cr–DLC coating on nitrided Ti6Al4V alloy by magnetron sputtering
K Weicheng, Y Zhou, H Jun - Diamond and Related Materials, 2021 - Elsevier
A Cr–DLC coating was deposited on nitrided Ti6Al4V alloy (TA) by magnetron sputtering
(MS) using CrN as an interlayer. The characterization processes of obtained coating were …
(MS) using CrN as an interlayer. The characterization processes of obtained coating were …
Diamond-like carbon-deposited films: a new class of biocorrosion protective coatings
MR Derakhshandeh, MJ Eshraghi… - Surface …, 2018 - icevirtuallibrary.com
A series of diamond-like carbon thin films was applied on AISI 316L stainless steel
substrates through a pulsed-direct current plasma-enhanced chemical vapor deposition …
substrates through a pulsed-direct current plasma-enhanced chemical vapor deposition …
Enhanced corrosion resistance of a novel periodic multilayered Si/(Si, N)-DLC coating against simulated coal mine water
X Wei, S Lu, J Ding, S Zheng, Z Chen, J Lu, Z Liu… - Ceramics …, 2024 - Elsevier
In this study, a novel periodic multilayered DLC coating, which was composed of a Si
interlayer and a Si/N co-incorporated DLC layer (Si/(Si, N)-DLC) per period, was deposited; …
interlayer and a Si/N co-incorporated DLC layer (Si/(Si, N)-DLC) per period, was deposited; …
Corrosion and wear behaviors of Cr-doped diamond-like carbon coatings
A combination of plasma-enhanced chemical vapor deposition and magnetron sputtering
techniques has been employed to deposit chromium-doped diamond-like carbon (DLC) …
techniques has been employed to deposit chromium-doped diamond-like carbon (DLC) …
Effect of temperature and bias voltage on electrical and electrochemical properties of diamond-like carbon films deposited with HiPIMS
H Dong, Z He, S Zhang, D Sun - Surface and Coatings Technology, 2019 - Elsevier
The relatively high electrical resistivity of diamond-like carbon (DLC) film is one of the main
drawbacks when applied in electronic device. In this study, DLC films were synthesized on …
drawbacks when applied in electronic device. In this study, DLC films were synthesized on …
Friction and wear of aC: H films deposited at different bias in air and NaCl solution
C Wang, X Sui, X Lu, X Zhang, Z Yan, Y Lu, J Hao - Tribology International, 2022 - Elsevier
Abstract aC: H films were produced on 316 L stainless steel via magnetron sputtering
technique. The effects of bias voltage on the composition, structure and properties of the …
technique. The effects of bias voltage on the composition, structure and properties of the …
Effect of chromium doping on high temperature tribological properties of silicon-doped diamond-like carbon films
BJ Rodriguez, TL Schiller, D Proprentner, M Walker… - Tribology …, 2020 - Elsevier
Amorphous carbon films were deposited by means of closed-field unbalanced magnetron
sputtering (CFUBMS). The silicon content was fixed at 1.3 at.%, while the chromium content …
sputtering (CFUBMS). The silicon content was fixed at 1.3 at.%, while the chromium content …
The correlation between optical and mechanical properties of amorphous diamond-like carbon films prepared by pulsed filtered cathodic vacuum arc deposition
N Konkhunthot, S Tunmee, XL Zhou, K Komatsu… - Thin Solid Films, 2018 - Elsevier
Diamond-like carbon (DLC) films were deposited by pulsed filtered cathodic vacuum arc
(FCVA) deposition. The microstructure, mechanical and optical properties of DLC films have …
(FCVA) deposition. The microstructure, mechanical and optical properties of DLC films have …
Microstructure, adhesion and tribological behaviors of Si interlayer/Si doping diamond-like carbon film developed on nitrile butadiene rubber
L Qiang, C Bai, Z Gong, A Liang, J Zhang - Diamond and Related Materials, 2019 - Elsevier
Si doping diamond-like carbon (Si-DLC) films were prepared on NBR (nitrile-butadiene
rubber) in order to improve its friction and wear resistance. Prior to the Si-DLC film …
rubber) in order to improve its friction and wear resistance. Prior to the Si-DLC film …
New bio-active, antimicrobial and adherent coatings of nanostructured carbon double-reinforced with silver and silicon by Matrix-Assisted Pulsed Laser Evaporation …
Abstract We report on Matrix-Assisted Pulsed Laser Evaporation (MAPLE) deposition of
Carbon thin films, simple or reinforced with intended concentrations of Ag and Si. A KrF∗(λ …
Carbon thin films, simple or reinforced with intended concentrations of Ag and Si. A KrF∗(λ …