Developing partially oxidized NiCr coatings using the combined flame spray and plasma spray process for improved wear behaviour at high temperature

SR Medabalimi, MR Ramesh, R Kadoli - Wear, 2021 - Elsevier
The powders of NiCrBSiFe and NiCr are partially oxidized using a flame spray process and
are deposited on MDN321 steel substrate using a plasma spray process. The effect of partial …

Effect of operating parameters of worm gearbox on lubricant oil temperature

A Chougale, J Bhat, M Desai, U Bhapkar - Materials Today: Proceedings, 2022 - Elsevier
Worm gearbox has the relative sliding motion between a tooth of worm and worm wheel
which causes friction energy loss. The loss in friction energy is transfer into an equivalent …

[PDF][PDF] Multi-objective crashworthiness design optimization of a rollover protective structure by an improved constraint-handling technique

C Ma, H Fu, P Lu, H Lu - AIMS Press, 2023 - aimspress.com
This study proposes a multi-objective optimization (MOO) strategy with an improved
constraint-handling technique to improve the crashworthiness of an excavator rollover …

三维自由弯曲过程中临界偏距对管材成形精度影响

范鑫, 程宗辉, 李少鑫, 舒送, 程诚… - 北京航空航天大学学报, 2022 - bhxb.buaa.edu.cn
三维自由弯曲成形过程中弯管处于少约束状态, 弯管弯曲半径的大小及轴线形状取决于相应的
弯曲模偏距值. 为了准确成形出预设弯管的形状, 提高弯管的自由弯曲成形精度 …

The Combined Effects of Sliding Velocity and Martensite Volume Fraction on Tribological Behavior of a Dual-Phase Steel

Y Zhang, A Jourani - Lubricants, 2022 - mdpi.com
The focus of this study was the combined effects of sliding velocity (SV) and martensite
volume fraction (MVF) on the tribological behavior of dual-phase (DP) steel. Dry frictional …

High-temperature wear and frictional behavior of partially oxidized Al with NiCr composite coating

SR Medabalimi, MR Ramesh… - Materials Research …, 2019 - iopscience.iop.org
The influence of composite coating in improving wear and frictional behavior from room
temperature to 600 C was investigated. Partially oxidized Al powder was prepared with a …

Investigation on Tribological Behavior of Hot-Pressed Steel/TiB2 Composites Using Taguchi Experimental Design

S Sahoo, BB Jha, S Mantry, SK Nayak… - Journal of Materials …, 2022 - Springer
This article presents the dry sliding wear response of steel composites reinforced with TiB 2
particles prepared by hot consolidation. Taguchi's L 27 orthogonal array design is adopted …

[PDF][PDF] 表面形貌对粗糙接触界面流体润滑特性的影响

董磊, 车飞飞, 刘焜, 王俊元, 石瑞敏 - 润滑与密封, 2020 - qikan.cmes.org
为探究不同表面形貌对粗糙接触界面液体润滑特性的影响, 基于有限差分法结合雷诺方程和膜厚
方程, 研究阶梯形貌, 波纹形貌, 随机形貌和峡谷形貌4 种不同粗糙接触界面液体润滑时的载荷 …

Finite element-based safety prediction for hydraulic excavator rollover protective structure and experimental validation

C Ma, Y Gao, J Yang, Y Duan, Z Liu - International journal of …, 2022 - Taylor & Francis
Tractor and earth-moving machine rollover has become one of the leading causes of
occupational death in the agricultural/constructional industry. Therefore, these machines …

A thermo-mechanical numerical method for modelling heating due to frictional sliding

T Saksala - 2024 - trepo.tuni.fi
Heating due to frictional sliding is an important phenomenon in tribological applications. The
present study develops a numerical method based on the finite elements (FE) for modelling …