Equiaxed solidification of AlMgSi alloys with Fe and Mn was studied by electromagnetic
stirring to understand the effect of forced flow. The specimens solidified with a low cooling …

Natural convection is present in all liquid alloys whereas forced convection may be applied
as the method to improve material properties. To understand the effect of forced convection …

The solidification of AlCuSi alloys with Mn and Fe was studied by rotating a magnetic field to
understand the effect of melt flow. The specimens solidified with a forced convection, low …

Experiments were carried out to analyze the effect of growth rates (VL) and cooling rates
(TR) on both secondary dendritic arm spacings (λ 2) and Vickers microhardness (HV) of an …

During mold filling and casting solidification, melt flow caused by gravity is present.
Otherwise, forced flow may be a method applied for casting properties improvement. The …

Convection caused by gravity and forced flow are present during casting. The effect of forced
convection generated by a rotating magnetic field on the microstructure and precipitating …

Convection forces can cause significant segregation within the liquid during directional
solidification, influencing the structure of the mushy zone and the type and distribution of …

Mushy zone morphology in AlSiMn alloys was studied using directional solidification, and
the CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry) technique …

The results are presented from experimental studies of the microstructure and phase
composition of AK7ch Al–Si alloy with an iron content of 0.4 wt% before and after introducing …

ВВЕДЕНИЕ Самой важной системой алюминиевых сплавов является Al–Si (силумины),
где присутствие кремния (4.0–13%) способствует хорошим литейным свойствам …