The microstructure, dimple structure, and mechanical properties of a cold-rolled Fe–18Mn–
0.6 C–1.5 Al TWIP steel were investigated as a function of annealing temperature. The …

The flow behavior of alumina-forming austenitic steel was studied using axisymmetric hot
compression on a Gleeble-3500 thermomechanical simulator. The temperature range was …

High manganese twinning induced plasticity (TWIP) steel is an attractive material for
automotive applications as its use could result in an improved vehicle fuel efficiency and a …

The high temperature tensile behavior of Fe-22Mn-0.7 C Twinning induced plasticity (TWIP)
steel has been experimentally investigated from 700° C to 1250° C. It is shown that TWIP …

The activation energy for hot deformation (QHW) of high-Mn microalloyed TWIP steels was
determined from experimental uniaxial hot compression curves. The presence of …

The hot deformation and static softening behavior of various high Mn (20–30 wt%) austenitic
steels microalloyed with different V (0.1, 0.2 wt%), C (0.2, 0.6, 1 wt%) and N (0.005–0.025 …

The present study reports an equilibrium ultrafine equiaxed dual-phase microstructure to
regulate and achieved the low deformation temperature and high hot ductility balance in a …

In the present study, the hot ductility behavior and hot cracking susceptibility of high
manganese cast steel were investigated. Based on the 18Mn–0.6 C alloy, a nickel was …

Deformation and work hardening behavior of Fe–17Mn–0.02 C steel containing ε-martensite
within the austenite matrix have been investigated by means of in situ microstructural …

The interaction between recovery, recrystallization, and strain-induced precipitation in two
high-Mn steels, one of them microalloyed with Nb (0.1 pct) was investigated using …