The ever‐increasing quest to identify, secure, access, and operate oil and gas fields is
continuously expanding to the far corners of the planet, facing extreme conditions toward …

Directional drilling has become popular in recent decades in both onshore and offshore
operations due to reduced drilling costs and improved recovery. In a directional well drilling …

The present study is focused on the experimental evaluation of the non-intrusive electric
resistance tomographic (ERT) technique in the presence of different types of water-based …

In a horizontal well drilling operation, a part of generated drill cuttings tends to settle down at
a lower annular section. Formation of sand bed causes several operational issues such as …

Актуальность работы вызвана необходимостью современной оценки решения
проблем: моделирования течений смеси вязкой жидкости с твердыми частицами и …

Hole cleaning is a concern in directional and horizontal well drilling operations where drill
cuttings tend to settle in the lower annulus section. Laboratory-scale experiments were …

Optimal and cost-effective drilling operations in extended-reach horizontal wells depend on
efficient solid cuttings removal from the borehole. Several solids-suspended multiphase …

Two of the most critical measurements during and after drilling a geothermal well are the
bottom hole circulating temperature (BHCT) and the static formation temperature (SFT) …

The oil and gas well construction is often associated with the unknowns and uncertainties
while executing the operations. Because, while drilling, the drilling bit is under the ground …

Inadequate wellbore cleaning is a recurring problem as removing cuttings from thousands of
meters from the downhole to the surface is challenging during any drilling process. High …