The advancement of solid-state hydrogen storage materials is critical for the realization of a
sustainable hydrogen economy. This comprehensive review elucidates the state-of-the-art …

Metal injection moulding of miniaturized devices demands unique feedstock materials and
mould designs with high dimensional accuracy. In this work, the influences of the powder …

Solid solution powders of Ti-22Al-25Nb (at.%) were successfully prepared with Ti, Al, and
Nb elemental powders via mechanical alloying (MA). The effects of milling time, stearic acid …

The presence of inorganic substances in the composition of crude wax decreases its
commercial value, necessitating purification of the product. A new physical surface treatment …

In low-pressure powder injection molding, the injection presses are equipped with an
interconnecting pipe in which the segregation of feedstocks may occur during the dead time …

Moldability and segregation of feedstock are linked to the rheological behavior of the
powder-binder mixture. In this study, the impact of binders on viscosity and segregation of …

In this study, a systematic research has been conducted into the powder modification
mechanism, the effects of binder compositions on the thermal behavior, and the mechanical …

Optimization of molding parameters at different filling stages requires that the characteristics
of low-viscosity feedstocks must be properly known. In this study, the influence of the particle …

Powder-binder separation during injection moulding causes defects such as cracking,
warpage or anisotropic shrinkage during firing. In this paper, thermogravimetric analysis …

In this work, 32 different feedstocks formulated from four different stainless steel powders
and two wax-based binder systems (paraffin wax and beeswax), for which the proportion of …