Plasma-facing components (PFCs) are used as the barrier to the beam of high heat flux
generated due to nuclear fusion. Therefore, efficient cooling of PFCs is required for safety …

The thermal performance of high heat flux components in a fusion reactor could be
enhanced significantly by the use of nanofluid coolants, suspensions of a liquid with low …

The impact of temperature dependent thermal conductivity and convective surface
conditions on unsteady 3D Sisko nanofluid flow over a stretching surface is studied in the …

In order to meet the cooling needs of high heat flux (HHF) internal plasma facing
components (PFC) of fusion reactor, experimental investigations of hypervapotron (HV) heat …

The paper describes commissioning of the inductive heater based on numerical simulation
of inductive heating in the hypervapotron sample and test channel. The HEFEL loop is being …

This article aimed to investigate the transient dissipative magnetohydrodynamic double
diffusive free convective boundary layer flow of electrically conducting nanofluids from a …

The divertor first wall and neutral beam injection (NBI) components of tokamak devices
require high heat flux removal up to 20–30 MW m− 2 for future fusion reactors. The water …

Increased cooling performance is eagerly required for many cutting edge engineering and
industrial technologies. Nanofluids have attracted considerable interest due to their potential …

The rotating experimental devices are designed to investigate the compatibility of fusion
reactor materials with Al 2 O 3-water nanofluids. The specimens are exposed to different …

Nanofluids are advanced two-phase coolants that exhibit heat transfer augmentation
phenomena. Extensive research has been performed since the year 2000 onwards to …