Oxy-fuel combustion of pulverized fuels (PF), as a promising technology for CO 2 capture
from power plants, has gained a lot of concerns and also advanced considerable research …

The co-firing of coal and biomass in oxy-fuel fluidized beds is one of the most promising
technologies for capturing CO 2. This technology has attracted wide attention from academia …

Co-combustion characteristics of textile dyeing sludge (TDS) and pomelo peel (PP) under O
2/N 2 and O 2/CO 2 atmospheres were investigated using a thermogravimetric analysis …

A fundamental investigation has been conducted on the combustion behavior of single
particles (75–150 μm) of four coals of different ranks: anthracite, semi-anthracite, medium …

Semi-coke is blended with bituminous coal in oxygen-enriched atmospheres to be efficiently
used as an energy source. Combustion characteristics and kinetic behavior of blends under …

As an increasingly popular method in the machine learning field, deep learning is applied to
industrial combustion processes in this work. Using easily available color flame images …

The effect of CO 2 introduction in a biomass fast pyrolysis process at 850° C was
investigated. It was found that CO 2 impacts the final gas yield and composition, and the …

Coal particle combustion experiments were performed in a drop tube furnace (DTF) with
oxygen concentration from 21% to 100%, in N 2 and CO 2 mixtures, under quiescent flow …

Oxy-fuel combustion is usually performed in pf reactors under an enriched O 2 atmosphere
of CO 2 to obtain a high CO 2 content in the flue gases. The effect of the differences in …

Co-firing technology at large power plants can contribute to reducing emissions and
maintaining stable and secure electricity supplies. Due to the higher reactivity of biomass, a …