Thanks to the low working temperature, less product size limitations and one order of
magnitude higher deposition rates compared to the established additive manufacturing …

Small specimen mechanical testing is an exciting and rapidly developing field in which
fundamental deformation behaviours can be observed from experiments performed on …

Assessing the damage tolerance and durability of additive manufactured (AM) materials is a
key factor in the airworthiness certification of AM parts. Unfortunately, AM materials often …

A methodology that allows joint determination of fundamental engineering properties of
materials/components vital to their efficient design and a safe service lifetime operation is …

Deep research on the bending fatigue behaviors of rotor blade materials in the very-high-
cycle fatigue (VHCF) regime is necessary for designing the blade. In this study, a new …

Fatigue crack growth in self-standing plasma-sprayed tungsten and molybdenum beams
with artificially introduced notches subjected to pure bending was studied. Fatigue crack …

A complete description of the experimental procedure for characterizing the intrinsic fatigue
crack propagation threshold (ΔK th, eff) as well as the fatigue crack growth rate (FCGR) in …

Tungsten heavy alloys (WHA) are particulate composites of spherical W particles embedded
in a ductile Ni-rich matrix. In our study, pre-treated W and Ni feedstock powders were used to …

Fracture toughness and fatigue crack growth rates of free-standing thick W deposits
produced in a protective atmosphere using radio frequency inductively-coupled plasma …

Metoda cold spray je inovativní postup aditivní výroby materiálů (CSAM). Na rozdíl od
aditivních metod výroby za pomoci laseru disponuje několika specifickými výhodami, které ji …